remove the grip and detach the motor from the mechbox, reseat it and try again.

How would I go and reset the motor?

Remove the motor housing from the mechbox entirely (2 screws) with the motor still contained within said housing. See if the motor turns freely and then re-install the housing complete with motor. Put the 2 screws back in, re-install the grip (1 screw) and test the gun.

so am i not taking the motor out? Am i just checking to see if the motor rotates?

Does anyone have a photo of the inner gear box? I have one spring that I cannot find a place for and a proper photo would help.Thanks

Hicap issue
 

I played all day today with one of my ICS hicap and had no feeding problems. I think the issue is that I didn't inserted it deep enough first hand so the seal wasn't tight between mag and gun. So don't desesperate and keep driving the mag further so that it sits tight in the magwell, it should feed. I'm still going to tape the sides of the loosy mag tough.

Yet, I noticed that the little lever to release the mag is not that tight and seems to go down a few millimeters when a mag is inserted. I'd like to know if there's a peculiar way to adjust the mag release... Does anyone has some input here?

Gun works
 

I got my gun working. It turns out that I had a blown fuse. This was only a $1.09 fix at a local hardware store. I inserted it myself too. After that I had no problems. The gun is awesome, I made a target in my basement and am having a fun time. I just cant wait to see it in action at that aco monthly the 21st. Also, does anyone know if I can buy a bipod for the gun?

i am planning to buy this gun at evike's, i am wondering what type of battery does it come with? Just curious thats all.
* planning to buy a 9.6v 3300 large battery. I hear that it is compatible with this gun with modifications?
if true do you have to purchase anything else for the modification?

You can't fit a 9.6v large battery without mods. Stick to an 8.4v 3000mah as it's a perfect fit. The gun runs fine with 8.4v.

well at the airsplat site they said it can fit a 9.6 v with modification
i'm just wondering what is that modification and do i have to purchase anything for it to hold a 9.6v

it usually involves removing material from the stock.

removing what?
i just ordered my ics ak 74 today yay cant wait

ordered it from evike's, comes with everything but dont know why they charge so much freakin money for tax.. 27 bucks wtf.

I finally had a chance to test side rail with r/s PSO1 scope. It doesn't fit. Rail construction is slightly different from r/s or Guarder rails. So if you want to use r/s optics or RDS than you will have to replace the rail.

Edit, apparently PO scope (civi version of PSO1) fits ICS AK. I just found some pics of the gun with PO scope on it. Doesn't make any sence to me since both scopes are made for the same side rail as far as I know.

Accessories Questions: which one fits ICS AK-74M ?
 

Since ICS Ak74M is a very new product,I am a little confused about what accessories are actually usable with this gun.I would like to know what works and what doesn't.

1.Cobra Red dot sight.
which version of Kobra sight fits ICS AK-74M?Anyone got a chance to try it?
this one??
EKP-1S-03M
http://tantal.kalashnikov.guns.ru/media/x03M_02.JPG
http://tantal.kalashnikov.guns.ru
OR this one??
EKP-8-02
http://tantal.kalashnikov.guns.ru/high/G204.jpg
http://tantal.kalashnikov.guns.ru
2.Which bayonet(airsoft ones,real steel bayonets won't be allowed in any game :banghead: ) fits ICS AK-74M?

3.Which Grende Launcher fits ICS AK-74M?
G&P AK GP25 Grenade Launcher
OR
STAR GP-30 40MM Underbarrel Grenade Launcher

Can anyone with experience with these products help to answer my questions?

Thanks!
Update:Both of them should fit.I just got mine Kobra sight a few weeks ago.