Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Upgrades & Modifications (https://airsoftcanada.com/forumdisplay.php?f=24)
-   -   AK Stock Flange (https://airsoftcanada.com/showthread.php?t=102391)

shadow_matter April 15th, 2010 20:28

AK Stock Flange
 
Where can I find the vertical flange that attaches to the back of an AK47 body so I can mount a full stock? The AK I have now is configured for a M4 crane stock.

On the other hand, does someone knows where I can get a 9.6v 3000mah+ crane stock battery in 2/3A cells?

I figure the two options would end up costing the same.

I have looked extensively online and haven't found anything.

Thanks in advance.

cerealmaniac April 15th, 2010 20:33

lemme look through my pile of parts. i might have a couple to spare

Styrak April 15th, 2010 21:41

2/3A cells are mini battery cells, and the most you'll find is 1500mAh or 1600mAh.

Anything higher than that doesn't exist.

shadow_matter April 15th, 2010 22:58

What about crane stocks that fit sub-c's? I have a mod stock now and it will only accomodate the mini cells.

oOMuDOo April 16th, 2010 07:45

cerealmaniac,

If you have extra or Shadow does not take it... im very interested.

Regards,
Mud

shadow_matter April 16th, 2010 11:14

If he has an extra, I will be grabbing it. LOL ;)

Crunchmeister April 16th, 2010 11:16

You can get 4/5 A cell battery packs in up to 2200 mAh. Those works quite well. Those are typically the cells used in crane stock batteries. It's what I use in my guns, and have never run out of power during a game.

shadow_matter April 16th, 2010 19:02

You're using the crane stock that have the removable back plate which reveals the two side tubes, right?


All times are GMT -4. The time now is 12:17.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.