7.4v Lipo or 11.1v Lipo on Lightly upgraded TM AK47
 

Sup ASC!

As the title goes, i gotta TM AK-47, w/ upgrades

-Spring guide
-metal bushings
-tapping plate
-metal bearings?
-piston/clyinder head

Shooting this AEG, is it safe? the reason is to achieve a better trigger response.

Thanks!

mhh, except the battery I don't think any of these upgrade will change anything to the trigger response :/

16:1 gears, bearing bushings, bearing spring guide, merf 3.2 installed in the 3 wire method) and an 11.1v 25-30c 1600+mah lipo and a sorbo pad to correct the aoe, should give u good trigger response. In my mp5 with an m90 spring its near instant and runs about 28bbps.
a heavier spring will reduce that a bit

7.4 , 11.1 if you want problems. Just my 2 cents.

no problems.with an 11.1 if u run a fet to save wear and tear on the tigger contacts and have good aoe to prevent piston/gear damage, you can reliably run 25-30 bbps if you take care in shimming and aoe