Quote:
Originally Posted by Kos-Mos
...
If you bought the piston I think, it is normal that you have a hard time to fit it inside the cylinder. The ones I am talking about are made with a thin lip all around the piston head. The lip is so soft that it will grab on the treads and jam between the piston and cylinder.
There also is 3 different versions of VSR-10 cylinder sets.
Regular
Bore-up
Short stroke
Make sure you bought the right parts for the right version. The stock one should be a regular. By the issues you are describing, you might have bought a bore-up kit.
The bipod mount on the TSD M700 is molded in the stock plastic. It is bound to break. You can buy a separate nub and replace it VERY easilly by drilling a hole for the screw and place it at the same place the stock one it. You can also simply install a 20mm rail at the same place, using the front barrel bolt and make a hole for the second one. G36C rails work good for that.
|
hey Kos, the piston came with the Zero Trigger (90 degree vs 45 degree piston).
And thanks for the tips. definately plan to fix the bipod mount. Bipod ftw!