Airsoft Canada - View Single Post

Darklen · November 7th, 2009, 11:11

I have a TD Flashbang gas charger that leaks (not exactly like the one pictured below, but very similar). Leakage is from where the bottom plate attaches to the cylindrical body. I can not figure out if these parts are fused/glued together or screwed and sealed with an oring. As this is a clients property, I certainly do not wish to damage it attempting disassembly if at all possible. Has anyone had one of these part before or do they even come apart?

And just because I know someone will ask, yes I'm sure this is where it's leaking form and no where else. I submerged the entire charger when filled and that's where the bubbles came from.

November 7th, 2009, 11:11	#1
Darklen Administrator Trader rating Join Date: Jan 2004 Location: Red Deer, AB	Gas Charger Leakage Issue I have a TD Flashbang gas charger that leaks (not exactly like the one pictured below, but very similar). Leakage is from where the bottom plate attaches to the cylindrical body. I can not figure out if these parts are fused/glued together or screwed and sealed with an oring. As this is a clients property, I certainly do not wish to damage it attempting disassembly if at all possible. Has anyone had one of these part before or do they even come apart? And just because I know someone will ask, yes I'm sure this is where it's leaking form and no where else. I submerged the entire charger when filled and that's where the bubbles came from. __________________ *ASC Age Verifier for Red Deer & Area Alberta* Last edited by Darklen; November 7th, 2009 at 11:15..