Airsoft Canada - View Single Post

Dire_Wolf · March 24th, 2011, 20:31

Personally, I'd grind off the top of the shell a 1/2 mm at a time or so, and move the screw tab down in the lower to accommodate... Instead of messing with the feed lips and seal and what not... But perhaps a full disassembly of the mag would help?

On second thought, grind a bit of the top on the mag stop hole, lowering where the mag release holds it

March 24th, 2011, 20:31	#6
Dire_Wolf Trader rating Join Date: Nov 2003 Location: Calgary, Alberta	Personally, I'd grind off the top of the shell a 1/2 mm at a time or so, and move the screw tab down in the lower to accommodate... Instead of messing with the feed lips and seal and what not... But perhaps a full disassembly of the mag would help? On second thought, grind a bit of the top on the mag stop hole, lowering where the mag release holds it __________________ Current Gear: TM G36C/SL-9, WE M14, WE PDW, KWA USP, KJW USP Tactical Future Gear: TM PSG1, M700, ARES DSR-1 v2 Last edited by Dire_Wolf; March 24th, 2011 at 20:33..