Airsoft Canada - View Single Post

Danke · June 26th, 2012, 20:40

I'm running a stock open bolt WE CQBR. So far stock, I followed the pre-fire lube list and I've had to re-seal 2 magazines so far. It's only been out for about 6 games so far. And the end of the day I'll crack it open and air gun any grime off and then wipe and re-lube.

I've been hoping for more consistent hop though and the full under/over scenario is what I've got for sure. I'll try the soft bucking. I also built an extender so it's a bit easier to dial in the adjuster screw but you still have to crack it open. I am trying to work out a piece of cable that I can use as a flexible key so all I have to do is lock the bolt back and thread it in.

I wasn't sure if the hopup was just needing a bit more breaking in or if was time to start changing stuff.

June 26th, 2012, 20:40	#25
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	I'm running a stock open bolt WE CQBR. So far stock, I followed the pre-fire lube list and I've had to re-seal 2 magazines so far. It's only been out for about 6 games so far. And the end of the day I'll crack it open and air gun any grime off and then wipe and re-lube. I've been hoping for more consistent hop though and the full under/over scenario is what I've got for sure. I'll try the soft bucking. I also built an extender so it's a bit easier to dial in the adjuster screw but you still have to crack it open. I am trying to work out a piece of cable that I can use as a flexible key so all I have to do is lock the bolt back and thread it in. I wasn't sure if the hopup was just needing a bit more breaking in or if was time to start changing stuff. __________________ Airsoft, where nothing is hurt but feelings.