Airsoft Canada - View Single Post

Spike · May 9th, 2013, 21:14

Just installed some Lonex high speed gears and piston into a teammates G&P m4. The gun shoots fine on auto, but on semi, it acts as if the battery is completely dead and it takes 3-4 trigger pulls for the gun to cycle, as the piston just gets progressively further back into the gearbox. Every once in a while the gun will shoot normally on semi. Tried with several batteries, got the same result.

Full parts list:
G&P shell + bearings
Lonex 16:1 gears
lonex extreme toughness piston
Modify cylinder + head
Modify air nozzle
40D sorbo pad
SHS cutoff lever
stock wires
SHS high torque motor

May 9th, 2013, 21:14	#1
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	Gun struggles on semi Just installed some Lonex high speed gears and piston into a teammates G&P m4. The gun shoots fine on auto, but on semi, it acts as if the battery is completely dead and it takes 3-4 trigger pulls for the gun to cycle, as the piston just gets progressively further back into the gearbox. Every once in a while the gun will shoot normally on semi. Tried with several batteries, got the same result. Full parts list: G&P shell + bearings Lonex 16:1 gears lonex extreme toughness piston Modify cylinder + head Modify air nozzle 40D sorbo pad SHS cutoff lever stock wires SHS high torque motor __________________ I change primaries like other people change socks.