[Hectic]

I pulled the box out this morn befor i left for work and by pressing on the axels with them facing downwards i can see/feel that there is no movement in the spur and almost none in the sector so its definately a lil too tight.
Useually what i do with the bevel is hardly shim it off the spur the put a 1.5 or 2 mm shim on top leaving about 0.5-1.5 (idealy 0.5mm) of upward play thus the motor shims it off of the spur.
Ie when its setting without a motor it has barely the 0.5mm clearence off thesur and then the motor provides a lil more spacing between them once its in place.