I'm just going to come in and comment on this. I have a client gun on my bench a tan ares g36c with KV stock. The piston is the exact same color. The gearbox was previously unopened, I broke the seal, so that piston was factory installed. No bearing in it either.
Quote:
Originally Posted by Yuu
That's what I was thinking, I worked a lot of Ares G36 series and I don't remember that piston was in that colour.
|
Quote:
Originally Posted by Kratisto
Are you sure this is really a unmodified brand new Ares G36CV? Did you buy it in a store, or by a "friend"?
All out-of-the-box Ares G36 guns I've seen (and S&T/Umarex clones) use clear plastic pistons and piston heads, plain grey shrinkwraped motors with soldered contacs, and typical white Tamiya connectors, not those yellow ones. Also, the gears look mismatched, each one from a different origin.
Ares does have QC issues, but this looks like a bad tech job made with second hand parts taken from ACM guns...
:-|
|
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
|