[quote=kar120c;1849432]
Quote:
Originally Posted by e-luder
It could be.
It's really hard to know for sure.
There is a few possible scenarios where a trigger does not reset.
What are these scenarios? maybe the Guarder Steel trigger bar may be useful?
|
both stock, and guarder bars are fine for these guns, and neither will solve (nor cause in my experience) the lack of trigger return after firing. (barring the small spring pulling the relay bar forward is not installed properly, which is easy to do, but once you look at the spring, and how it seats on the bar and trigger mechanism, you can easily identify when and where there would be interferece)
ironically, the hammer and sear springs can cause this. i have had them "unseat" per se, and not sit in their proper position from time to time, and this would cause the trigger to not retract after a shot.
that being said, i would pull the whole mechanism out of the back of the gun, disassemble, CLEAN THOROUGHLY, and reinstall with careful attention to the spring(s) orientation in their respective locations.
this solved the EXACT issue spoken of for me many a time.
-Michael