[turok_t]

Originally Posted by jjkfeng

The trigger resets, but after the first shot, nothing happens when pulled. After taking it apart...it seems that the trigger do not fully return (it turns like 95%of the way) after the first shot, and the subsequent pulls on the trigger doesn't affect the hammer. It looks it MIGHT be the trigger bar is rubbing against the trigger a little, not sure about this...

Any ideas how to fix this? Thanks!


Also e, the trigger was rubbing against the frame but I sanded it ever-so-slightly now they don't touch anymore but the trigger still feels unsmooth.

Yeah I figured it was the trigger not resetting and not the nozzle. The trigger stir up bar prob not engaging the sear to release the hammer