|
I found the problem. I dont know what happened through time but the bb well (or the hopup bucking) is off by about 2mm.. i can put a washer on the hopup bucking to offset the mis alignment.. but that would mean the nozzle would sit 2mm farther from the hopup. I can fix the feeding issue but i would sacrifice the air tightness.
If you ask me why i cant do it in the bb well instead.. i have tried that. The magazine will just push it off when inserted.
I'm not sure if you can picture what im talking about.. i'll try to post pictures soon.
__________________
MORE FPS :banghead:
|