Airsoft Canada - View Single Post - Kwa rm4 erg

Crimzzen · July 24th, 2014, 16:19

Hey ghouls and gals,

I'm going to be changing out my front end and I'm just looking for clarification/comments that I'm on the right track here.

My gun is the KWA magpul PTS RM4 ERG.

This is the hand guard I want to use:
http://madbull.com/catalog/en/daniel-defense-mfr-9.html
Inside Diameter is 40.9mm

This is the suppressor I'm thinking:
http://www.airsoftparts.ca/store2/in...oducts_id=1046
Diameter is 40mm so very tight fit. 245mm long which is 9.6"

I'll be running the battery in a PEQ - 15 battery box

I just need to find a compatible outer barrel. I'm looking for something 6" (not including threading).

I did a sketch to work out how it will look, See link below:

Basically my inner barrel measures 15" from the end of the receiver. 9" of that is the DD rail. Ideally I'd like .5-1" of suppressor past the inner barrel. Doing maths that means I would need a 6" barrel to have the suppressor .6" past the inner barrel. 6" barrel + 9.6" suppressor is 15.6". I also like the look of it based on the sketch and AR builder.

Here's the sketch:

EDIT:
Found these outer barrels, will any of em work?:
http://shop.ehobbyasia.com/action-6i...l#.U9FuRbEdWmw
http://shop.ehobbyasia.com/ad-classi...l#.U9FtdLEdWmw
http://shop.ehobbyasia.com/gandp-m4a...l#.U9FuHrEdWmw

So does this work? Am I missing any parts (I am completely new at this). Can anyone recommend a 6" outer barrel compatible with KWA RM4s?

Thanks!

July 24th, 2014, 16:19	#1
Crimzzen Trader rating Join Date: May 2013 Location: West Coast	Kwa rm4 erg - front end Hey ghouls and gals, I'm going to be changing out my front end and I'm just looking for clarification/comments that I'm on the right track here. My gun is the KWA magpul PTS RM4 ERG. This is the hand guard I want to use: http://madbull.com/catalog/en/daniel-defense-mfr-9.html Inside Diameter is 40.9mm This is the suppressor I'm thinking: http://www.airsoftparts.ca/store2/in...oducts_id=1046 Diameter is 40mm so very tight fit. 245mm long which is 9.6" I'll be running the battery in a PEQ - 15 battery box I just need to find a compatible outer barrel. I'm looking for something 6" (not including threading). I did a sketch to work out how it will look, See link below: Basically my inner barrel measures 15" from the end of the receiver. 9" of that is the DD rail. Ideally I'd like .5-1" of suppressor past the inner barrel. Doing maths that means I would need a 6" barrel to have the suppressor .6" past the inner barrel. 6" barrel + 9.6" suppressor is 15.6". I also like the look of it based on the sketch and AR builder. Here's the sketch: EDIT: Found these outer barrels, will any of em work?: http://shop.ehobbyasia.com/action-6i...l#.U9FuRbEdWmw http://shop.ehobbyasia.com/ad-classi...l#.U9FtdLEdWmw http://shop.ehobbyasia.com/gandp-m4a...l#.U9FuHrEdWmw So does this work? Am I missing any parts (I am completely new at this). Can anyone recommend a 6" outer barrel compatible with KWA RM4s? Thanks! Last edited by Crimzzen; July 24th, 2014 at 16:39..