Airsoft Canada - View Single Post - Ideas to keep motor's (black) cable from slipping out of tab when putting grip back on.

War-Lock · August 22nd, 2014, 22:01

Hey ASC

When i pull the trigger( without the pistol grip plate on) the motor goes wizzzzzzzz

when i put the pistol grip's end plate on then pull the trigger, the trigger goes back and it goes *click*

Is it the negative connector?

It's a VFC 416 and i need some idea to keep the (negative cable , black) from un attaching itself when i assemble the grips butt plate.

- I do have the butt plate height adjustment down a bit to keep the motor from popping up and disconnecting the black cable,

- the red cable pops in nice and snug, the black one is pushed up at the edge of the pistol grip, how to keep that black tab down? ....like a bad shot of tequila

O:

Thanks you!

August 22nd, 2014, 22:01	#1
War-Lock Trader rating Join Date: Dec 2003 Location: Woodbridge, Ontario	Ideas to keep motor's (black) cable from slipping out of tab when putting grip back on. Hey ASC When i pull the trigger( without the pistol grip plate on) the motor goes wizzzzzzzz when i put the pistol grip's end plate on then pull the trigger, the trigger goes back and it goes click Is it the negative connector? It's a VFC 416 and i need some idea to keep the (negative cable , black) from un attaching itself when i assemble the grips butt plate. - I do have the butt plate height adjustment down a bit to keep the motor from popping up and disconnecting the black cable, - the red cable pops in nice and snug, the black one is pushed up at the edge of the pistol grip, how to keep that black tab down? ....like a bad shot of tequilaO: Thanks you! __________________ Signature images can not exceed 510 x 100 pixels. See this thread for more details: http://www.airsoftcanada.com/showthread.php?t=53249 Last edited by War-Lock; August 23rd, 2014 at 20:39.. Reason: half of the reasons in the world ...