Airsoft Canada - View Single Post - Black Hawk style CQC Holsters and they're ability to weather hits

ccyg8774 · July 17th, 2015, 12:43

I found some times the "spring" piece of the locking mechanism do get dislocated on repro blackhawk style holsters, by pressing them too hard or pressing in a certain angle. Is this similar to the problem you have on yours?
This happened to both of my two repro blackhawk holsters but never happened to anyone of the four real blackhawk holsters I owned.
Removing the pin, taking the "spring" piece out, and adjust its shape seems to help on the repro holsters. It may take several trials but eventually I got both of my repro holsters problem free. To remove the pin you may need to drill a hole on the plastic and/or filing a groove on the metal pin.

July 17th, 2015, 12:43	#10
ccyg8774 Trader rating Join Date: Jun 2012 Location: Brampton, ON	I found some times the "spring" piece of the locking mechanism do get dislocated on repro blackhawk style holsters, by pressing them too hard or pressing in a certain angle. Is this similar to the problem you have on yours? This happened to both of my two repro blackhawk holsters but never happened to anyone of the four real blackhawk holsters I owned. Removing the pin, taking the "spring" piece out, and adjust its shape seems to help on the repro holsters. It may take several trials but eventually I got both of my repro holsters problem free. To remove the pin you may need to drill a hole on the plastic and/or filing a groove on the metal pin. __________________ Last edited by ccyg8774; July 17th, 2015 at 12:48..