Quote:
Originally Posted by Drakker
Why not switch back to the plastic TM nozzle and see how it goes?
There's a reason loading nozzles are plastic. It prevents wear on the other parts, and it can bend and absorb shock better. Aluminium nozzles can be nice in certain situations, but for most builds they are not a good idea.
|
While I was taking your advice and switching back to the stock parts i suddenly noticed something about the inside of the Custom slide, there is a hole!!
because I don't have a cocking handle yet I fitted the heave stock sights on the slide, looks fine needed a little fitment HOWEVER on the underside where there is a hinge for the sight there is a big indent. On the stock TM the dent is not so big so I thought Hummm .... maybe the nozzle spring is not being compressed properly.
So i used some electrical tape to cover the underside of the slide where the BBU goes and lubed it up and put it all back together for a final test!
BAM!!! it all works perfectly now!!!
all i need to do it Test fire it to see if it all works with BB's and Green gas.
THE STRUGGLE IS REAL BUT THANKS DRAKKER FOR THE ASSISTANCE!