Quote:
|
Originally Posted by Kid
Totally off topic, but I don't want to gravedig and the info has been given, may as well.
CND_Stalker,
You've mentioned that you have mags with 30 rnds?
Which is that? Would that happen to be the long Tanaka mags?
There were conflicting reports on that, so I was wondering about that.
Or would that be the custom one MadMax was working on...?
You had mentioned before that you had planned to do some modifications in another thread. Have you had any more progress on those? Any recommendations for the ASC comunity?
|
I only own 10rd standard mags in my M700, although a Tanaka 30rd mag would be a neat change to make.
Only mods I did and mentioend on my M700 were down withint a couple days of receiving it, cut the striker spring down by two coils to reduce the amount of force it releases gas at, making it release gas more consistant; and remove the stock to barrel support to let the outer (and result inner) barrels lie as they want to. Truns out the three I ordered (two are in the hands of team mates, same thing with theirs) is the outer barrel wants to lie to the left a bit, meaning when we received them, the inner barrels were slightly curved due to the support. Used to get 10shot CD sized groups at 30ft the first few weeks I had it, things worked in well and now I get consistant dime sized groups with it at 30ft with whatever ammo I use (Straights are not as good though unless washed). Only thing I did mod was to install a G&G Striker Spring for the Tanaka M24 and M700, found I didn't like it (have to NIB ones for sale though) as it made the power go up even MORE from stock, increased bolt pull and trigger pull as well.
One thing I found is tha the KJW M700 needs to have a dry swab run through it every 30 or so shots to keep the consistancy at it's best, otherwise flyers start occuring.