Quote:
Originally Posted by BoomHoweR
Does anyone know if the TSD M14 takes the KA low caps and if they hold up well?
mabey even a review by a owner was looking to get one as a project gun
or loaner
thanx
BooMs
|
I've asked the same question to BIGMEDECIN and here what he wrote:
I ordered a set of mid-cap king arms mags for it, unfortunately there are very close but do not feed due to the mags BB feed well being slightly lower, not allowing the hop chambers tube to push the BB holding latch open to feed BBs, but it is only by about .005-.010 of an inch, I intend to build a brass ring that will press over the hop chamber extending it so it will go further into the mag, then all TM M-14 mags will work, as so should the Chines mags.