Airsoft Canada - View Single Post - Silencer is effecting full-automatic on TM G36C

Schwag · February 25th, 2008, 14:03

At a high rate of fire, leftover air spilling out of the barrel won't have time to clear the silencer between shots and will create all sorts of weird wind flow in the silencer that can really mess with your bbs.
It can slow them down, drive them to one side, etc. I had similar problems with my mp5.
Extend your inner barrel, use slower battery or drill small holes in your silencer an inch or so past the inner barrel tip. You could change your cylinder but then you probably won't have enough air to fully push the bb.

Assuming it's not the foam.

Good luck

February 25th, 2008, 14:03	#8
Schwag Trader rating Join Date: Sep 2006 Location: A sick fascist corporatocracy.	At a high rate of fire, leftover air spilling out of the barrel won't have time to clear the silencer between shots and will create all sorts of weird wind flow in the silencer that can really mess with your bbs. It can slow them down, drive them to one side, etc. I had similar problems with my mp5. Extend your inner barrel, use slower battery or drill small holes in your silencer an inch or so past the inner barrel tip. You could change your cylinder but then you probably won't have enough air to fully push the bb. Assuming it's not the foam. Good luck __________________ (Former)Grand Poobah of T.W.A.T.