|
What the hell is that bump on the underside
of the blow chamber? All the guns I own are
smooth, no big indent for the hammer to get
stuck in...
Well, could be worse— you could be that other
guy with the WE that's barrel bushing ripped
apart the metal slide.
My guesses are the recoil spring is too weak
and possibly the recoil rod/ bushing are not
keeping the slide from going back too far.
Try putting a few washers or rubber pads
at the base of the recoil spring.. if you have.
The disconnector has to fall into it's own
groove during a cycle to allow the hammer
to fire, if it gets stuck down you can't pull
the trigger.
Saint, you know what I wan to say!! lol.
|