Airsoft Canada - View Single Post - problem with hicapa shooters design chamber/outer

Azuki · December 18th, 2008, 02:54

Did you file it evenly? there may be a slight gradient that isn't noticable by simply looking at it. Check that all 3 axis are flush and 90* to eachother. So 1. make sure that length wise its flush, 2. width-wise not much to check, 3. but height wise make sure its flush too.

Its really weird :s... seems like that Capas giving you quite alot of trouble >_<... I'm sure it'll all come together soon.

December 18th, 2008, 02:54	#8
Azuki Trader rating Join Date: Sep 2008 Location: Toronto	Did you file it evenly? there may be a slight gradient that isn't noticable by simply looking at it. Check that all 3 axis are flush and 90* to eachother. So 1. make sure that length wise its flush, 2. width-wise not much to check, 3. but height wise make sure its flush too. Its really weird :s... seems like that Capas giving you quite alot of trouble >_<... I'm sure it'll all come together soon. __________________ CAPS Shooter WA SV Infinity 5" Classic