G36C large foregrip

swatt13 · March 3rd, 2006, 20:38

has anybody installed one of these, i would like to see some pics of a gun with this installed on it.

Anduril · March 3rd, 2006, 20:40

Heres a few:

http://www.airsoftcanada.com/gallery...hp?i=1186&c=14

http://www.airsoftcanada.com/gallery...hp?i=1074&c=14

http://www.airsoftcanada.com/gallery...hp?i=1229&c=14

swatt13 · March 3rd, 2006, 20:42

thats it!? i cruised through the gallery a few times before i posted, that barley looks any different from the stock fore grip. thanks for your help.

CDN_Stalker · March 3rd, 2006, 21:08

A couple of those have turned up in the Warmonger's armoury the past year, they look and work well. Just to get a 9.6V battery in there, you have to snap off a plastic hook located in the front end, and then fiddle with getting the battery in, hooked up and grip back on again. Because the 9.6 batteries are about 1/2" to 3/4" longer (8 cells instead of 7) than an 8.4V, if you run an 8.4V you should be "A-Okay"!

QuiN · March 4th, 2006, 04:28

Hmmm... the only Large Foregrip for the G36C i know is this one, which can hold a large-type battery.

Other foregrips are imho for converting the gun to a E oder K -version.

Pedro888 · March 5th, 2006, 20:25

I personnaly have a bigger foregrip and I have in it a 9.6v 3000 MaH battery and this thing ripped. I have changed to metal bearings and an Systema MS-100. Honestly its incredible the rate of fire I can get.

swatt13 · March 5th, 2006, 22:27

Quote:

Originally Posted by Pedro888

I personnaly have a bigger foregrip and I have in it a 9.6v 3000 MaH battery and this thing ripped. I have changed to metal bearings and an Systema MS-100. Honestly its incredible the rate of fire I can get.

did the foregrip change the look of the gun much? could you expplain it at all?

p.phresh · March 6th, 2006, 10:43

there isn't much of a change in aesthetics. It looks nearly the same from a side profile, but straight no you will notice the difference in width, and when you've got it in your hand you will know it's much wider in comparison to the stock one.

The grip is just wide enough to get a large 8.4v battery in. I'd recommend it. Prolly one of the best upgrades you can get for you G36c. Increased rate of fire and longer running times.

Quote:

Originally Posted by Anduril

Heres a few:

http://www.airsoftcanada.com/gallery...hp?i=1186&c=14

http://www.airsoftcanada.com/gallery...hp?i=1074&c=14

http://www.airsoftcanada.com/gallery...hp?i=1229&c=14

as well, only the G36 in the second picture has the oversized foregrip that will hold the large battery for G36c, the others are G36Ks.

swatt13 · March 6th, 2006, 15:59

sweet, i think it looks pretty pimp (the second one) thanks for the info, ill definatly get one.

Pedro888 · March 6th, 2006, 18:30

Its a bit heavier overall cause of the bigger battery but for the rest its worth every penny!!

Malfrat · March 7th, 2006, 06:13

Quote:

Originally Posted by Pedro888

Its a bit heavier overall cause of the bigger battery but for the rest its worth every penny!!

Amen!!

stev0__ · March 7th, 2006, 09:55

Quote:

Originally Posted by QuiN

Hmmm... the only Large Foregrip for the G36C i know is this one, which can hold a large-type battery.

Other foregrips are imho for converting the gun to a E oder K -version.

i just recently installed this on my g36c it looks great kinda futuristic(which im not a fan of) but its still a g36c so i like it and i can hold 9.6v 200mah in it and i only takes a few minutes of fiddling with to get it in but its so nice to have the ability to have large batteries now and as someone else said here it does become fairly front heavy and unbalanced :tup:

analog · April 22nd, 2006, 16:02

with this installed, what do you do about a sling mount, because i dont seem to see any rings anymore.??????

Mr Jon · April 22nd, 2006, 16:28

You can always pick up a sling hoop pin that goes in place of the handguard pin normally if you do in fact loose that ability to use the stock sling hoop.

p.phresh · April 22nd, 2006, 16:41

use a 1pt sling and attach it to the sling mount on the body.
As well, you can attach the OEM sling mount on the bottom rail.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 3rd, 2006, 21:08	#4
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	A couple of those have turned up in the Warmonger's armoury the past year, they look and work well. Just to get a 9.6V battery in there, you have to snap off a plastic hook located in the front end, and then fiddle with getting the battery in, hooked up and grip back on again. Because the 9.6 batteries are about 1/2" to 3/4" longer (8 cells instead of 7) than an 8.4V, if you run an 8.4V you should be "A-Okay"! __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

March 5th, 2006, 20:25	#6
Pedro888 Trader rating Join Date: Nov 2005 Location: Sherbrooke, Quebec	I personnaly have a bigger foregrip and I have in it a 9.6v 3000 MaH battery and this thing ripped. I have changed to metal bearings and an Systema MS-100. Honestly its incredible the rate of fire I can get. __________________ PeDrO 1st Pathfinders Regiment ''Don't go to Bagdad unless you wanna bang!''

March 6th, 2006, 18:30	#10
Pedro888 Trader rating Join Date: Nov 2005 Location: Sherbrooke, Quebec	Its a bit heavier overall cause of the bigger battery but for the rest its worth every penny!! __________________ PeDrO 1st Pathfinders Regiment ''Don't go to Bagdad unless you wanna bang!''

March 3rd, 2006, 20:40	#2
Anduril Trader rating Join Date: May 2004 Location: Vancouver, B.C.	Heres a few: http://www.airsoftcanada.com/gallery...hp?i=1186&c=14 http://www.airsoftcanada.com/gallery...hp?i=1074&c=14 http://www.airsoftcanada.com/gallery...hp?i=1229&c=14

March 4th, 2006, 04:28	#5
QuiN Trader rating Join Date: Feb 2006 Location: Made in Germany	Hmmm... the only Large Foregrip for the G36C i know is this one, which can hold a large-type battery. Other foregrips are imho for converting the gun to a E oder K -version.

April 22nd, 2006, 16:02	#13
analog Trader rating Join Date: Apr 2006 Location: Littleton, Colorado	with this installed, what do you do about a sling mount, because i dont seem to see any rings anymore.??????

April 22nd, 2006, 16:28	#14
Mr Jon Trailer Park Supervisor Trader rating Join Date: Jul 2003 Location: Winnipeg MB	You can always pick up a sling hoop pin that goes in place of the handguard pin normally if you do in fact loose that ability to use the stock sling hoop. __________________

April 22nd, 2006, 16:41	#15
p.phresh Trader rating Join Date: Sep 2004 Location: Winnipeg, MB	use a 1pt sling and attach it to the sling mount on the body. As well, you can attach the OEM sling mount on the bottom rail.

G36C large foregrip

Accessories Discussion