|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
February 16th, 2010, 13:20 | #1 |
SRC HK416 Receiver Compatibility
I own a SRC Gen III HK416 and I have been trying to figure out what receivers will fit for it. I previously owned a G36C and do not know that much about the M4 line in terms of aftermarket gear.
I know that the top reciever is different from standard M4s but how about the lower? Will any of the aftermarket ones work? One thing I want to do is get a cheap all plastic upper and lower set to do some painting pratice on and to see what color combos I like with the rest of my gear. It would also allow me to screw up a few times without caring as much. I have tried searching but didn't see anything too relevant. Also waiting for the AV to get processed. |
|
February 16th, 2010, 14:43 | #2 |
You need a Marui M4 lower, or SRC M4 lower.
The followings are NOT compatible: G&G, G&P, ICS, Guarder, Hurricane Ken 007Airsoft |
|
February 16th, 2010, 16:06 | #3 |
Ken, will it fit Kingarms body?
|
|
February 16th, 2010, 16:28 | #4 |
the reciever i assume is the Body? i saw a SRC gen 3 M4 with a metal Echo body is looked sweet. ill shut up now i should of read the title. its the 416
Last edited by MMatersk; February 16th, 2010 at 16:29.. Reason: didnt read it properly |
|
February 16th, 2010, 17:18 | #5 |
Guest
|
What about VFC?
|
February 16th, 2010, 18:21 | #6 |
Harvester of Noobs' Sorrow
|
the VFC 416 receiver is not compatible with Marui or any other manufacturer.
__________________
Weapons Technician / Gunsmith Don't look at me, I don't know, lol ¯\(°_o)/¯. |
February 16th, 2010, 18:24 | #7 |
Does SRC use the 2-piece hop up unit or something? If it takes a Marui body, then as long as you just buy a one piece hop up unit you should be able to use KA or G&P bodies, etc.
__________________
I love freedom and consequently America |
|
March 8th, 2010, 04:39 | #8 |
March 8th, 2010, 04:40 | #9 |
|
Bookmarks |
Thread Tools | |
|
|