|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
April 12th, 2010, 22:00 | #1 |
Noveske KFH installation problem
I just got a Noveske KFH and I'm trying to install it onto my M4.. both my M4 and my KFH are 14mm thread, but when I try installing it the KFH just wont fit.. i tried spinning it both ways but i know for sure that the KFH is CCW thread
what could be the problem? |
|
April 12th, 2010, 22:01 | #2 |
What brand M4 are you installing it on? Some are ccw, others (WE M4, PTW... ) are CW.
|
|
April 12th, 2010, 22:03 | #3 |
April 12th, 2010, 22:07 | #4 |
Wanna buy some Nod's? #StolenValour
|
G&P guns are CW
__________________
ΜΟΛΩΝ ΛΑΒΕ |
April 12th, 2010, 22:08 | #5 |
April 12th, 2010, 22:09 | #6 |
Wanna buy some Nod's? #StolenValour
|
Sure..the easiest and cheapest solution would be to sell the CCW KFH and buy a CW one instead.
__________________
ΜΟΛΩΝ ΛΑΒΕ |
April 12th, 2010, 22:10 | #7 |
April 12th, 2010, 22:15 | #8 |
Red Wine & Adderall
|
You could always attempt to source an adapter that would change your CW barrel to CCW.
__________________
"Its only a little bit on fire" |
April 12th, 2010, 22:16 | #9 |
April 12th, 2010, 22:16 | #10 |
MrChairsoft
|
Yes they do. Check airsoft parts.
|
April 12th, 2010, 22:16 | #11 |
Wanna buy some Nod's? #StolenValour
|
__________________
ΜΟΛΩΝ ΛΑΒΕ Last edited by ex; April 12th, 2010 at 22:19.. |
April 12th, 2010, 22:18 | #12 |
thanks for all your help =D
|
|
April 13th, 2010, 01:16 | #13 |
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
Get a machinist to bore out the back of it and install a 14mm CW plug. I had to do it on my KFH because ehobby screwed up my order...
|
April 13th, 2010, 01:41 | #14 |
asexual lumbricus terrestris
|
madbull I think makes a CW to CCW rethreader.
|
|
Bookmarks |
Thread Tools | |
|
|