Type 0 Cylinder on TM M14? Yes or No?

[PARALLAX]

Was wondering if its worth it. If it will boost fps, or have a negative impact on performance?

I'm running a 6.03 tightbore, modify S100+ spring, all other piston componants are stock.

[Styrak]

An M14 should already have a non-ported cylinder.

[PARALLAX]

Originally Posted by Styrak

An M14 should already have a non-ported cylinder.

I was starting to think that, but I admit it's been a while since I had it apart. I might be confusing the internals with my other AEG.

[blade_x23]

It also kinda depends if it's a standard M14 or a M14 socom (due to difference in barrel length). I believe there's an article on arnie's airsoft about cylinder types and what goes with which barrel length or somethin like that.

[Styrak]

Originally Posted by PARALLAX

I was starting to think that, but I admit it's been a while since I had it apart. I might be confusing the internals with my other AEG.

You should be good to go unless you've changed it for some reason .

[ILLusion]

The Tokyo Marui M14 does not use a regular AEG cylinder. It is longer. A type 0 cylinder would not be appropriate.

Get a v7 gearbox-specific cylinder.