cansoft ICS M4 motor

[Huge]

Hi everybody

I got an ICS M4a1 and I heard that the motor was kinda weak ( I haven't had time to test that yet on mine) soI was wondering if I could resolve this situation by an ICS Turbo 3000 motor (I reckon it's the one used in the full metal versions yes?).

[Hairu]

That will work
but you might want to look into other internals too
from what Ive heard all the sportline internals are weak

[Crunchmeister]

Originally Posted by Hairu

from what Ive heard all the sportline internals are weak

The rest of the internals are the same as on the full metal ICS.

[Huge]

if I remember correctly, cansoft really only means the tinted lower and different motor. I do think, like Crunchmeister, that the internals are the same.

Apart from the stronger motor, are there any other really useful modifications that I should do on my ICS?

[marcwhite]

From my experience with the ICS cansoft m4's, you SHOULD get a new piston, piston head, and tappet plate. You MAY also want a new cylinder head and wire harness/switch assembly.

my 0.2

[Huge]

Originally Posted by marcwhite

From my experience with the ICS cansoft m4's, you SHOULD get a new piston, piston head, and tappet plate. You MAY also want a new cylinder head and wire harness/switch assembly.

my 0.2

good tips. are these parts ICS only or can they be from any manufacturer?