Gun Setting

Brokenwings · May 13th, 2010, 23:58

I bought a used gun and the setting for Safe Semi and Auto is lose. It dsnt click anymore when you switch them. Is there a part to replace this?

pusangani · May 14th, 2010, 00:01

Quote:

Originally Posted by Brokenwings

I bought a used gun and the setting for Safe Semi and Auto is lose. It dsnt click anymore when you switch them. Is there a part to replace this?

perhaps mentioning what kind of gun/brand you have would help

SidVicious · May 14th, 2010, 03:05

Quite common in AKs if I'm reading between the lines.

As Pusangani pointed out, that's quite like emailing tech support because "When I click, the computer doesn't do what I want"

Munaro · May 14th, 2010, 05:23

Quote:

Originally Posted by SidVicious

Quite common in AKs if I'm reading between the lines.

As Pusangani pointed out, that's quite like emailing tech support because "When I click, the computer doesn't do what I want"

omg I get to many of those at work!

Rugger_can · May 14th, 2010, 05:52

I had a lady call me to let me know that her fucking printer killed her dog once. I'd take 100 failure to plug unit in calls rather then take that one.

Sheesh.

Also I agree, sounds like an AK issue

In the middle of the selector switch there is a small flat disk. Using your fingers gently tighten it finger tight until the "clickityclak" is returned to your selector.

Cheers

ShelledPants · May 14th, 2010, 08:11

Quote:

Originally Posted by SidVicious

Quite common in AKs if I'm reading between the lines.

As Pusangani pointed out, that's quite like emailing tech support because "When I click, the computer doesn't do what I want"

AKs go Safe Auto Semi... so... probably an M4/G36/Mp5 variant.

Styrak · May 14th, 2010, 10:03

How about everyone stops speculating and wait for an answer.

Brokenwings · May 14th, 2010, 18:24

Its an M4A1 lol. sorry, din't realize the type would make a difference.

SidVicious · May 14th, 2010, 22:04

Quote:

Originally Posted by ShelledPants

AKs go Safe Auto Semi... so... probably an M4/G36/Mp5 variant.

You're right, facepalmed when I re-read myself, I'll blame the lack of sleep.

Especially embarassing considering I just unboxed a Cyma 036 :roll:

chaosnemesis · May 15th, 2010, 09:08

Quote:

Originally Posted by Brokenwings

Its an M4A1 lol. sorry, din't realize the type would make a difference.

Heh. yes it does. There's a spring loaded (for lack of better word) bearing under the selector that has probably fallen out.

Boyso · May 15th, 2010, 12:26

Or the small holes where the lever clicks are filled with either paint, or dust or anything.

Brokenwings · May 15th, 2010, 15:13

And this part can be bought at airsoftgi or something?

Boyso · May 15th, 2010, 15:36

www.airsoftparts.ca

Support locals!

Renegade) · May 15th, 2010, 15:58

If its loose, remove the mechbox and tighten the screw on the reverse side of the selector lever.

Brokenwings · May 16th, 2010, 11:02

Cool thanks guys i will

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 13th, 2010, 23:58	#1
Brokenwings Trader rating Join Date: Apr 2010 Location: Ottawa, Orleans (Ontario)	Gun Setting I bought a used gun and the setting for Safe Semi and Auto is lose. It dsnt click anymore when you switch them. Is there a part to replace this?

May 14th, 2010, 05:52	#5
Rugger_can Trader rating Join Date: Dec 2001 Location: Downtown Ottawa	I had a lady call me to let me know that her fucking printer killed her dog once. I'd take 100 failure to plug unit in calls rather then take that one. Sheesh. Also I agree, sounds like an AK issue In the middle of the selector switch there is a small flat disk. Using your fingers gently tighten it finger tight until the "clickityclak" is returned to your selector. Cheers Last edited by Rugger_can; May 14th, 2010 at 05:59..

May 14th, 2010, 10:03	#7
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	How about everyone stops speculating and wait for an answer. __________________ Airsoft Sales and Repair/Upgrade Services

May 14th, 2010, 03:05	#3
SidVicious Trader rating Join Date: Feb 2008 Location: Montréal	Quite common in AKs if I'm reading between the lines. As Pusangani pointed out, that's quite like emailing tech support because "When I click, the computer doesn't do what I want"

May 14th, 2010, 18:24	#8
Brokenwings Trader rating Join Date: Apr 2010 Location: Ottawa, Orleans (Ontario)	Its an M4A1 lol. sorry, din't realize the type would make a difference.

May 15th, 2010, 12:26	#11
Boyso a.k.a. LastSpartan Trader rating Join Date: Jul 2009 Location: Québec city	Or the small holes where the lever clicks are filled with either paint, or dust or anything. __________________ NEW BACON FOR SALE! "WHEN I DIE BURY ME UPSIDE DOWN SO THE WORLD CAN KISS MY ASS" -Platoon

May 15th, 2010, 15:13	#12
Brokenwings Trader rating Join Date: Apr 2010 Location: Ottawa, Orleans (Ontario)	And this part can be bought at airsoftgi or something?

May 15th, 2010, 15:36	#13
Boyso a.k.a. LastSpartan Trader rating Join Date: Jul 2009 Location: Québec city	www.airsoftparts.ca Support locals! __________________ NEW BACON FOR SALE! "WHEN I DIE BURY ME UPSIDE DOWN SO THE WORLD CAN KISS MY ASS" -Platoon

May 15th, 2010, 15:58	#14
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	If its loose, remove the mechbox and tighten the screw on the reverse side of the selector lever. __________________ W1-5

May 16th, 2010, 11:02	#15
Brokenwings Trader rating Join Date: Apr 2010 Location: Ottawa, Orleans (Ontario)	Cool thanks guys i will

Gun Setting

General