|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
April 15th, 2011, 21:42 | #1 |
Kwa m93r : Cylinder split in half
Ok now something bad happened :/
I was just trying out some news mags I received (probably not the cause), and out of a sudden I saw a "big" black piece flying out of the gun. Turns out it was the cylinder, cylinder pin, nozzle and nozzle spring that were ejected out of the gun O_O The cylinder broke exactly at the pin's location. I'm trying to epoxy it back together, even if I'm almost sure it won't hold :'( (not a lot of surface for contact) Anyone have an idea about what could have happened??? |
|
April 15th, 2011, 23:07 | #2 |
My KWA M93r did the same thing a couple weeks ago (minus the shooting-of-parts excitement).
The gun started out fine, then was venting gas after about 5 shots from a full mag. The problem, as you might have also determined, wasn't the mag, as I found no issue following its inspection. Next thing was the cylinder splitting in half - exactly at the pin, like in your case. Poor design. I believe the issue stemmed from lack of lubrication in the cylinder's sliding path. It was pretty dry inside when it happened, and its obviously a high friction area with a lot of motion. So far I've placed an order for 2 stock cylinder replacement from KWA, as there doesn't seem to be any upgrade for it at this time. If anyone knows of a metal upgrade part, I'd love to get ahold of one. Once the replacement arrives, will try again with plenty-o lube. (ordered 2 parts, incase that isn't the main problem)
__________________
|
|
April 15th, 2011, 23:23 | #3 |
At least I know I'm not alone
Where did you get the parts from and how much? Mine wasn't *dry* but yeah I suspected a lacl if lube as well... Any other inputs are appreciated MP |
|
April 15th, 2011, 23:36 | #4 |
I had to go directly to KWAusa proshop online.
http://store.kwausa.com/partsm93riin...springs-1.aspx $10 part + $21 shipping to Ontario Thats why I've ordered 2 - shipping is still $21 I had to call in to place the order as the check-out wasn't friendly to Canadian orders. (FYI, KWA told me they had stock on a Friday when I ordered, and were out of stock the following Monday....before they shipped my order...they expect stock next week)
__________________
|
|
|
Bookmarks |
Thread Tools | |
|
|