|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
October 14th, 2012, 22:05
|
#1 | |
|
Suburban Gun Runner
|
Loss of FPS on A&K Saw
I've torn the stock hop up rubber on my A&K saw. I have replaced the rubber with a CA one. Now I have lost about 50-60 fps. The stock A&K rubber does not have lips like the CA one. Does anyone know if the A&K nozzle is proprietary?
__________________
Quote:
|
|
|
|
|
October 15th, 2012, 01:05
|
#2 |
|
The A&K mk43 nozzle can be directly replaced with this one: http://shop.ehobbyasia.com/action-me...asada-aeg.html
Not sure if the gearboxes are the same between the mk43 and the saw, but if they are try that one. Not sure about the hopup rubber.
__________________
H-61 "Acta non verba" They see us rollin, they hatin... |
|
|
|
|
October 15th, 2012, 10:55
|
#3 |
|
formerly Sepulcrum
|
I actually modded an m4 nozzle to work with one, just had to thin it out till it fits. My a&k ran 100% with that till I sold it and I used it allot.
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
