|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
December 31st, 2012, 05:32 | #1 |
Banned
|
Plug in MOSFET for ARES?
I have an Ares LMG.
Here is whats inside Guarder Torque up motor modify piston head modify cylinder head modify m90 spring I just want to know if there is any plug and play mosfets available that would be significantly beneficial to me. as mainly a gas guy, I'm used to the almost instantaneous trigger response, now I know that there is no way to 100% replicate this. Is there anything an AEG elistist can tell me to improve this thing? Im a noob with these things :P |
December 31st, 2012, 11:41 | #2 |
As far as I know the Ares LMG uses a proprietary gearbox so you are out of luck if you want to install something like a Raptor or Chimera, so unfortunately the product you're looking for simply doesn't exist.
Your best option is to learn how to disassemble and reassemble the LMG and its gearbox so that you can assess whether you would be able to install a real FET like this one: http://www.airsoftstore.ca/index.php...roducts_id=134 . That's realistically the only way you're going to deliver more power to your motor/gear system. Also, before anyone tries to confuse you, "plug-in" trigger computer units like the Burst Avocado and Burst Wizard, etc, do not and cannot function as MOSFETs. They physically cannot increase power delivery or trigger response due to being in-line with the battery.
__________________
"Mah check" Now you know |
|
December 31st, 2012, 12:24 | #3 | |
Banned
|
Quote:
I pretty much knew the BW and the avocado thing is garbage, thanks for confirming it tho I guess im SOL? |
|
December 31st, 2012, 12:26 | #4 |
Mr. Silencer
|
You should probably read this:
http://extreme-fire.com/Micro-Switch-Bounce.pdf I think if you got a good switch you can theoretically hook up a MOSFET to it, but the limiting thing is your microswitch at this point. Welcome to ARES. |
December 31st, 2012, 12:32 | #5 |
Banned
|
Like I stated before. Im a mainly gas person. Ive owned aegs before but they where like "ohh this is cool" buy it and play with it a few times and sell it.
Ive never actaully commited my time into an AEG but for some odd reason I love this one. Thanks for your link Im really SOL :P Guess I'll just suck it up |
December 31st, 2012, 12:51 | #6 |
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
You can put an external mosfet on any AEG, but you do need to take the mechbox apart to wire them.
As stated, the problem you'll likely encounter is a poor quality microswitch trigger that might not maintain a closed loop trigger signal, making it seem like the mosfet doesn't work, or only works intermittently |
|
Bookmarks |
Thread Tools | |
|
|