Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

First new AEG purchase

:

Newbie Tank

Reply
 
Thread Tools
Old October 15th, 2013, 23:02   #1
nh1977
 
Join Date: May 2013
Location: Ontario
First new AEG purchase

I am in the market for a new primary weapon, and after 3 weeks of research,reviews, countless hours on google , I am ready to pull the trigger so to speak. I have purchased a used mid grade AEG early this year and it has performed quite well for the most part with some minor techincal problems , now I am ready to spend on a decent model.

My budget is in the $400-500 range for gun , some basic requirements, crane stock ( 9.6 Nunchucks , deans will be added ), something in a M4 variant ,decent stock externals , metal gears & bushings, decent stock gearbox , TM Compatible for upgrading, Outdoor Play. I would like something that performs well out of box , and I have no problem upgrading and mods ( lipo,gears etc ) over the winter. Do I have unrealistic expectations? and the above requirements are not make or break just a guideline.

So I guess I am asking the community for some input & opinions , based on your'e expertise and experience. Below is what has caught my eye ( and my concerns ). I am also open to suggestions as well.

Socom Gear Barret rec7 m4 (10.5 or 14.5 ) made by VFC
Is it really a VFC Gear box , or a cheap knock off . I am getting mixed info on the gear box other than version 2 . Does it have metal gears and bushings or is it plastic? How concerned should I be about the self shimming gears?

Any Full Metal King Arms M4 Variants
I believe these will be classed in the elite series. Haven't narrowed a particular model down as of yet. They seem to be well built internally and externally.
Concerns , well known Mid cap fitting and feeding issue - there is no definite answer , sounds like a trail and error to find right mags .
Cut off Lever issue - Do I need to worry about it right out of the box, or is not so common . Would it be a major investment for a Gun tech to diagnose and replace if it was an issue.

Thanks
nh1977 is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Information Center > Newbie Tank

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 17:14.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.