I did it... tm g18c loading nozzle help!

[VoidRay]

So I did the most amateur thing ive done in a long time... I changed out my broken loading nozzle half asleep without pulling out the internals of the nozzle.. besides a rocket valve what else do I need? Hahaha laugh at me if you must!

[ccyg8774]

But... Do you still have the stuff inside your old nozzle?

[Kos-Mos]

I guess he meant he trashed the old nozzle with the insides.

You need the retainer (I think it's just a cross-pin), spring and rocket valve.
That's all.

[VoidRay]

Yes, the internals are all gone. Probably inside of a used diaper by now, all I have is a guarder nozzle

[GBBR]

Nice double whammy, the Guarder nozzle is VERY prone to failure, its a complete peice of shit

[VoidRay]

Haha great! So what nozzle should I get so when my gaurder fails I have a replacement, and does anyone know what parts I need?

[GBBR]

Originally Posted by e-luder

Loading Muzzles: (+1 Durability)
Note that this part is not cross compatible. An G18c loading nozzle is different from a G17 and G26

Airsoft Surgeon Enhanced Muzzle set:
I like it. I like it alot!!

AABB:
As mentioned above, this is not an ideal replacement part. Made out of plastic, it still flexes like the stock loading assembly.

Guarder:
Requires little to none modifications to fit and gets along with the internal components very well. But some operators have been reporting problems with breakage after a few mags worth. see the thread posts.

Element:
The next best thing to Guarder. It will outlast some of the other brands on the market though the piston lid maybe a bit tight.

Action:
Not as high grade as Guarder but not as low grade as AABB. Does the job.

AIP Enhanced Loading muzzle
It's ok. It's not the greatest. IT comes in a set that includes a floating valve + FV Spring. THe floating valve sux!

SilverBack:
Belongs with AABB in the lower tier upgrades. The fitting on these sets are horrible and doesn’t glide smoothly even with lubrication.

Enjoy

[Kos-Mos]

And if I remember correctly, the Airsoft Surgeon kit comes with everything you trashed, except maybe the cross pin.

You can make one out of any metal pin that fits the hole.

[e-luder]

Originally Posted by Kos-Mos

And if I remember correctly, the Airsoft Surgeon kit comes with everything you trashed, except maybe the cross pin.

You can make one out of any metal pin that fits the hole.

THe Tokyo Marui Glocks don't use cross pins for the floating valve blockers.
Instead, they use the tiniest screw in the world to fasten it.

I believe KSC is the one that uses that pin.


The Airsoft Surgeon kit is ONLY for a Glock 17, not a Glock 18.

Haha great! So what nozzle should I get so when my gaurder fails I have a replacement, and does anyone know what parts I need?

Get anything but the Guarder ones. THey are too weak.
I suggest getting the AIP one.

If I were in your shoes, I'd stick with the stock loading muzzle.

If you need one, you can PM me. I think I have a whole assembly somewhere...