June 12th, 2014, 13:56 | #31 |
"bb bukakke" KING!
|
you still need batts to run the fcu on the p*
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
June 12th, 2014, 14:01 | #32 |
Was about to say that. I had a problem with a 7.4 lipo on a p*. battery was about the size of my thumb 700mah tops,and in -20 weather it wouldnt power the FCU. Stuck it under my armpit for 10 minutes first then it worked.
|
|
June 12th, 2014, 14:02 | #33 |
Administrator of Pants
|
|
June 12th, 2014, 14:09 | #34 |
June 12th, 2014, 14:10 | #35 |
what's a p*?
__________________
|
|
June 12th, 2014, 14:15 | #36 |
"bb bukakke" KING!
|
polar star
I'd go the daytona gun route... P* just doesn't have enough feedback for me.. If you think AEGs make miserable amounts of noise.. P*s just so boop boop boop when you shoot them.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
June 12th, 2014, 14:16 | #37 |
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
I've been caliing nthem< pee asteriskss o_o
hm...it was more dramatic when it was all caps |
June 12th, 2014, 17:17 | #38 | |
Quote:
that work for you? |
||
June 12th, 2014, 17:55 | #39 |
multitech
|
__________________
Nothing says loving, like a head shot! |
June 19th, 2014, 20:33 | #40 |
__________________
"Too much Knowledge is Dangerous, not enough is Worse" |
|
June 19th, 2014, 23:15 | #41 |
I just went to adjust the crane stock on my aeg and heard a weird hissing sound and saw some smoke. Barely managed to get the 3s Lipo out of the stock as it was heating up. No fire but got very hot and swollen. I cut all of the connection wires in the off chance that would make it safer.
Close call for sure.
__________________
|
|
June 20th, 2014, 09:34 | #42 |
June 20th, 2014, 11:08 | #43 |
So just thought I would add this here.
Went to place an order for new batteries from Airsoftstore (Stealth) and they basically said "Hey, buy your battery and we will toss in a free replacement for you as well". SOLID! This is why I will continue to buy from them and steer people their way. CUSTOMER SERVICE!!! |
|
June 20th, 2014, 11:22 | #44 |
"bb bukakke" KING!
|
I have about 12 of those hobby king batteries, only 2 have swollen or gone south that were my fault with using them a little too exuberantly. One really swollen one died during a piston jam and the trigger contacts fusing/melting together on the test bench. The other is slightly puffy from over draw I think. That one is only used on the test bench now for quick access to disconnect it if it gets worse.
It's a well priced reliable battery... as reliable as lipos get anyways. Never lower your guard around them is the only advice I can give.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
June 20th, 2014, 11:31 | #45 |
Depending where you live, your local fire department may have a battery disposal program.
|
|
|
Bookmarks |
Thread Tools | |
|
|