|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
June 27th, 2014, 05:20 | #1 |
WE M9 Beretta Random Full Auto
I have a standard WE M9 Beretta but for some reason at random it seems to be going full auto or burst rather than semi all the time. Anyone got any idea on what I can inspect or repair to fix this issue? Is maybe a sear spring not strong enough or something? Looking for any input as I've been unable to figure out the cause at this point in time. I tried upgrading the hammer and recoil springs but even after swapping back to the originals it still occurs.
__________________
-=LieutenantPliers=- |
|
June 27th, 2014, 05:59 | #2 |
Check to see if the "knocker reset pin" (not sure if its the proper name) is worn down or not seating properly in the channel on the slide
If the pin is worn or out of place the knocker won't lock in place after the the slide blows back and will burst or full auto fire |
|
June 27th, 2014, 15:42 | #3 |
also...
check the nub on the trigger bar. If that's worn down, the blowback unit cant push the trigger bar down to lock the sear to the hammer...
__________________
"May you fight with the strength of ten full grown men." |
|
|
Bookmarks |
Thread Tools | |
|
|