|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
June 22nd, 2014, 23:07 | #1 |
Banned
|
Version 3 mystery, super gremlins, PLEASE READ
the gun
Echo1 Vss Val the run down upon inspection everything in this gun is wear free, cutoff lever is in mint condition, this gun has rarely been fired. the problem upon loading a magazine in the rifle and having bbs firing it will go on a mystery 3-5 round burst, gearbox can be fully taken out the gun, selector put in the semi auto position, having as much as a finger touching the nozzle, the gun will go on a mystery full auto rampage. why its weird this problem is completely absent when you are dry firing. |
June 23rd, 2014, 00:21 | #2 |
sounds like a tigger contact problem
try replacing that part with another one I have hade a few problems with those in version 3
__________________
Your brain is your best defence. Your weapon and effective use of command and control tactics immediately puts you on an equal or superior offensive footing. |
|
June 23rd, 2014, 00:25 | #3 |
Banned
|
blacksheep, its fine when i dry fire it, its only when you shoot it will you have problems, it is not the trigger contact, when there is more compression in the cylinder there is full auto..
|
June 23rd, 2014, 17:10 | #4 |
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
How much tension is there on the cutoff lever? And does it move freely with the sector gear in place?
Im just guessing here but maybe the shock of the piston hitting the cyl head shakes the cutoff lever out of its spot. |
June 29th, 2014, 00:42 | #5 |
Squid Porn Superstar, I love the tentacles!
|
Had a similar issue 4 years back or so. I had to sand the top of the trigger sled because it was getting caught on the release under the tappet plate.
|
June 29th, 2014, 01:48 | #6 |
"bb bukakke" KING!
|
check the switch prongs to see if they aren't grabbing the shuttle too tightly and check the tappet interaction with the shuttle and shuttle spring.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
July 2nd, 2014, 04:40 | #7 |
Banned
|
pesto was right
|
|
Bookmarks |
Thread Tools | |
|
|