|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
June 22nd, 2007, 17:31 | #1 |
Rocket Valve + Spring instal on KSC Glock 18?
Hey guys, I'm looking for any advice on installing my rocket valve and spring back into my KSC Glock 18 nozzel (Parts #24 & #25). The stock ones broke on me and it was months back so I can't exactly remember how they went in. Specificly what I need to know is how part #26 fits into the whole mix... ??? Does it go through the spring keeping the valve in the back part of the nozzel or what?
Thanks in advance.
__________________
If Rambo was a Ninja we'd have world peace. Last edited by Kingpin665; June 22nd, 2007 at 21:07.. |
|
June 22nd, 2007, 22:29 | #2 |
GBB Whisperer
|
Push part 24 & 25 as deep in to part 22 as they'll go (you just need to get it past the hole.
Insert part 26 into the hole. It's sole purpose is to act as a stopper to prevent the rocket valve from exiting the cylinder. |
June 23rd, 2007, 12:35 | #3 |
You sir... are the greatest, thanks again.
__________________
If Rambo was a Ninja we'd have world peace. |
|
|
Bookmarks |
Thread Tools | |
|
|