|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 27th, 2007, 07:09
|
#1 |
|
KJ M9 Full Metal - Slide won't return completely forward
I just got a new KJ M9, and I noticed that if I leave the mag inside, pull the slide back, and release it, it will return to about 3mm from the original position. You can see that the back sticks out just a little. If I then remove the mag it will pop back into place. It doesn't do this if I pull the slide without the mag. Any suggestions?
|
|
|
|
June 28th, 2007, 14:07
|
#2 | |
|
Official Crybaby Chairsofter
|
Hmm are you sure the mag is correctly inserted? And not to much in or something? Is it the original mag?
__________________
Quote:
|
|
|
|
|
|
June 28th, 2007, 19:08
|
#3 |
|
|
No, it's inserted alright.
|
|
|
|
|
June 28th, 2007, 19:15
|
#4 | |
|
NAAZ's #1 fan!
|
your slide return spring is weak, doesnt have the power to pull a bb out of the mag?
Orrrrrrr your gbb's piston is jammed forward (its happened on my hi-capa) remove the slide & check if its retracting all the way.... -alex
__________________
Quote:
|
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
