AR mags loose in magwell

conrad13 · November 4th, 2007, 12:35

I've got a TM M4A1 with a guarder metal body and one piece hopup. It has been in that configuration for 2 + years now. Recently my mags have had trouble feeding. There seems to be to much up and down movement, at least a few milimetres. I have to hold the mag up in the magwell for it to feed properly. This happens with my TM & KA lowcaps and my CA & SRC highcaps. Now my SRC M16 with G&P metal hopup and metal body doesn't has this problem at all. I tried switching out the mag catch but it had no effect. I'm wondering if the hopup feed tube in the G&P unit is a little longer then the guarder one, but I don't think that would explain why the problem started just now.

jonney. · November 4th, 2007, 14:06

Try tapeing the top of the mag around and around utill you get a proper fit to hold it in place.

takatorikku · November 4th, 2007, 15:52

are you using plastic mags? they could just be wearing, in which case metal mags would be the way to go

conrad13 · November 4th, 2007, 18:59

All the mags I've been using have been metal.

ThunderCactus · November 4th, 2007, 19:03

could your mag catch on your gun have worn out?

conrad13 · November 4th, 2007, 19:36

Quote:

Originally Posted by ThunderCactus

could your mag catch on your gun have worn out?

I tried switching my mag catch between my 2 ARs with no luck.

shifty51 · November 4th, 2007, 19:42

try bending the tab at the top of the mag out a little, i know this problem exists in some G&G guns and thats how you fix it

conrad13 · November 5th, 2007, 00:31

Do you think it would matter if one of the tabs on the upper receiver was broken? The tab one the selector switch side is broken.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

November 4th, 2007, 12:35	#1
conrad13 Trader rating Join Date: Dec 2004 Location: Oakville, Ontario	AR mags loose in magwell I've got a TM M4A1 with a guarder metal body and one piece hopup. It has been in that configuration for 2 + years now. Recently my mags have had trouble feeding. There seems to be to much up and down movement, at least a few milimetres. I have to hold the mag up in the magwell for it to feed properly. This happens with my TM & KA lowcaps and my CA & SRC highcaps. Now my SRC M16 with G&P metal hopup and metal body doesn't has this problem at all. I tried switching out the mag catch but it had no effect. I'm wondering if the hopup feed tube in the G&P unit is a little longer then the guarder one, but I don't think that would explain why the problem started just now. __________________ PETA: People for the Eating of Tasty Animals Last edited by conrad13; November 4th, 2007 at 19:35..

November 4th, 2007, 15:52	#3
takatorikku UnVerified Trader rating Join Date: Sep 2006	are you using plastic mags? they could just be wearing, in which case metal mags would be the way to go __________________

November 4th, 2007, 18:59	#4
conrad13 Trader rating Join Date: Dec 2004 Location: Oakville, Ontario	All the mags I've been using have been metal. __________________ PETA: People for the Eating of Tasty Animals

November 4th, 2007, 14:06	#2
jonney. Trader rating Join Date: Sep 2007 Location: Calgary AB	Try tapeing the top of the mag around and around utill you get a proper fit to hold it in place.

November 4th, 2007, 19:03	#5
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	could your mag catch on your gun have worn out?

November 4th, 2007, 19:42	#7
shifty51 Trader rating Join Date: Jan 2007 Location: Mississauga, Ontario	try bending the tab at the top of the mag out a little, i know this problem exists in some G&G guns and thats how you fix it __________________

November 5th, 2007, 00:31	#8
conrad13 Trader rating Join Date: Dec 2004 Location: Oakville, Ontario	Do you think it would matter if one of the tabs on the upper receiver was broken? The tab one the selector switch side is broken. __________________ PETA: People for the Eating of Tasty Animals

AR mags loose in magwell

Doctor's Corner