re-wire hk 416

[Alex_Glassman]

hey, i have a jg hk 416 with an external battery, if i were to purchase a stock that held the battery could i rewire it to hold the battrery in the stock?

[Muffin]

Open up your reciever, and remove your stock, pull the wires through from the front and feed thourgh the back where your stock is mounted and walla!
Research is appreciated before asking questions...

[Alex_Glassman]

i just tried that, its impossible to get the plug through

There is spade connectors just a few inches from the plug, you will need to unplug these, sometimes they are wraped in shrink wrap and are hard to see but they should be there.

[Bissa]

learn how to soder, cut the wire with about 2 inches remaining on the plug,refeed it through the stock and attach the plug back in the stock. this way you can also add length if needed.

PS: remember to reattach the the wires in the same order red:red black:black
PPS: if you actually learned from the PS than dont do this.

[Crunchmeister]

If you want to to it right going from front to rear-wired, you'll have to crack open the mechbox and rewire it so that the wiring comes out the back of the shell instead.

[Bissa]

crap I type slowly

[Alex_Glassman]

can someone link me to the right stock please?

[Muffin]

Either a crane of full(fixed) stock, search it up yourself kid.

[Deftonius]

Originally Posted by Muffin

Either a crane of full(fixed) stock, search it up yourself kid.

Be nice.

[Muffin]

It's just annouying when kids from outside of Canada come on here asking where they can get parts in their country. With alittle research it would save them alot of hassle.

[TokyoSeven]

Originally Posted by Alex_Glassman

hey, i have a jg hk 416 with an external battery, if i were to purchase a stock that held the battery could i rewire it to hold the battrery in the stock?

You already broke your hopup, and when we attempted to explain to you how to replace it you had difficulty grasping the difference between a one and a two piece hop up. I think a front to rear wire is a little bit above what you can do for a mechbox. Like I told you before there are many UK shops that offer upgrade services, I suggest you look into them.