G36C Silencer

[theguy]

uh oh... i have to switch out my cylinder?
care to explain?

[SHÖCK]

Originally Posted by theguy

uh oh... i have to switch out my cylinder?
care to explain?

Depending on the porting of your cylinder and whether or not it is a regular or bore-up cylinder, you can get barrel suck if the length of your inner barrel is greater than the volume of air inside the cylinder.

You can also see the matching cylinder porting and matching barrel length thread.

http://www.airsoftcanada.com/showthread.php?t=18038

Personally I think this is really only an issue with barrels 600mm and up so you should be fine. I also had issues using a bore-up with my 420mm barrel and had to switch back to stock.

[theguy]

Perfect
Thanks a bunch,
My parts arrive tomowrow, so hopefully everything works okay

[wobblypop]

sorry to necro a thread but wanting to know how everything worked? The barrel, suppressor etc...
Thanks

[theguy]

its worked....ish
I screwed it all together, and there was about a millimeter of inner barrel sticking out><
buuut
i managed to rig something up using my old broken TM velocity reducer

[wobblypop]

thanks for the info.
I have a JG G36c as well and am wondering how much if any difference you notice with a longer barrel?

[theguy]

I notice a pretty big difference...
Stock JG barrels are what, 6.08?ish mm
The Madbull i bought was 6.03mm and almost twice as long...
I have yet to game with the new barrel yet, so im not sure how it will perform on the feild

[magarcan]

I've a JG G36c wich I think has a bore-up cylinder.

I would like to improve his precission and his scope, so I've read that the best way to do this is using a inner barrel.

By default my AEG has a 247mm of length barrel. I don't want to change his cylinger. Wich barrel lenght do you think is the better for me???

PD: sorry for my english.

[theguy]

im not an expert, but i have a 455mm inner barrel and it works pretty well, Im sure there are much more experienced airsofters here who could help you more, but if you decide to go for more then 247mm be sure to buy a silencer to cover it

[Kos-Mos]

You can't go longer without changing the cylinder.

If you are certain it is a bore-up, you "could" try about 20mm longer (an inch).

Not worth it.