November 4th, 2008, 12:32 | #151 |
do hop-up units even exist? Is there any place that I may find them?
|
|
November 4th, 2008, 23:11 | #152 | |
GabeGuitarded
|
Dentrinity has them but they come with a 430mm inner barrel installed so if you're not confident removing the barrel to put the original back in then I wouldn't recommend it.
__________________
Quote:
|
|
November 6th, 2008, 22:18 | #153 |
what do you mean by that? Do they sell them with an inner barrel or something, or are you talking about, a whole upper half to a gun?
- and taking my barrel apart isn't the issue. In fact, because I know now to be careful, I could even open up my hop-up unit at this point. |
|
November 6th, 2008, 22:33 | #154 |
Also, I was looking on there, is it only the metal outer part to the hop-up unit without the bucking, screws, or plastic piece pushing down on it? All I really need is that one little plastic piece. And $60.00??? Damn.
|
|
November 7th, 2008, 17:16 | #155 | |
GabeGuitarded
|
That's the only thing I know that will have that plastic piece. You could try contacting Marui for a replacement part I suppose.
__________________
Quote:
|
|
November 7th, 2008, 17:25 | #156 |
hey, and while we're talking about it, how do you specifically Teflon tape the cylinder head? People seem to say "DO IT", but is it 1/4 inch that you put around it?
Also, are there any other parts that I could Teflon tape that would be beneficial in terms of FPS increase? A silencing factor would be great as well, but not if it takes away from my muzzle velocity. One cm long. Unscrew the cylinder head and put about 1 revolution of tape onto the threads counterclockwise. This is to make sure that it doesn't unwravel as you screw it back together. Last edited by andthenhewent; December 3rd, 2008 at 20:54.. Reason: figured it out. |
|
December 12th, 2008, 23:29 | #157 |
hey i have the VSR 10 and i am looking for a proper tight bore inner barrel i cant find one its really frusterating
|
|
December 13th, 2008, 03:05 | #158 |
it I weapon mounts air brake nothing more and 470 fps
|
|
December 13th, 2008, 19:31 | #159 | |
Quote:
second of all, if it is an odd length, such as my 460mm Well MB03 from airsplat.com, then you have to get it from a custom maker. |
||
March 23rd, 2009, 21:29 | #160 |
Hey, I was planning on getting the VSR-10 from airsoft Canada and I'm wondering if the barrel is the short version of the gun? I really don't want to buy the short version i would like to get the longer one.
|
|
December 6th, 2009, 01:19 | #161 |
hey
hey, sorry to interrupt guys but i was just wondering if there are any flash-hiders that would fit the VSR-10 Marui Clone
thanks in advance Blake |
|
August 13th, 2010, 05:02 | #162 |
hey i was trying to change my hop-up in VSR-10 and outer barrel would not some off i took everything apart and its stiff as hell i cant unscrew it any ideas?
|
|
September 23rd, 2010, 17:15 | #163 |
I need help with one of these..... I pull the bolt back, it locks fine, try to push it forward, and its almost seized, after applying pressure, it (bolt) slams forward, and pulling the trigger does nothing...... any ideas?
__________________
We are not the Public Service of Canada, We are not just another department, We are the Canadian Forces, and our job is to be able to kill people. Airborne. |
|
September 23rd, 2010, 19:23 | #164 |
Did you 'upgrade' it at all? Sounds like you're getting the vaccuum effect... Also, are your sears worn? The metal/tolerances on these things are absolutely atrocious.
|
|
September 24th, 2010, 12:41 | #165 |
No upgrades. Got this just over a week ago to see if I could get into sniping. Is this problem fixable?
__________________
We are not the Public Service of Canada, We are not just another department, We are the Canadian Forces, and our job is to be able to kill people. Airborne. |
|
|
Bookmarks |
Thread Tools | |
|
|