WIP: Upgrading Your Tokyo Marui Glock

[Ladyjaja]

I just bought a TM G17 for competition racing purposes.

When I press the mag release, the mag doesn't fall down. I have to give it a slight ramp in order for it to drop.

Is the reason for this because the gun is too new and the parts haven't break in?

[e-luder]

Originally Posted by Ladyjaja

I just bought a TM G17 for competition racing purposes.

When I press the mag release, the mag doesn't fall down. I have to give it a slight ramp in order for it to drop.

Is the reason for this because the gun is too new and the parts haven't break in?

It's possible.
The notch on the magazine where the catch actually "catches" the magazine may not be properly broken in yet.

either that or the gasses expanded inside the magazine to warp its dimensions such that the magazine is now too large. It's happened to operators before. It could be, albeit highly unlikely, extreme possibility.

Give it a few dry runs of ejecting and inserting of the magazine, making sure that you engage the magazine catch everytime. See how that works...

[e-luder]

Originally Posted by Danke

I just put one into the steel Guarder slide I've got on deck.

No one chiming in with where to find spare TM chassis parts yet?

Originally Posted by ILLusion

I just got a bunch of these Guns Modify G17 nozzles in stock as well. Haven't tried installing any yet, but if they're anything like their nozzle for the MP7, I'd say these are really solid.

Originally Posted by turok_t

The build quality of these are awesome, and shipping was dirt cheap. Can't wait to install these on my G17's:

So....
how are these fitting guys?

Is the hammer bearing interacting well with the "bump" on this BBU? That is, it's not having problems like the stock one does where the bearing gets hung up on that bump and impedes the cyclic rate????

That's one of my primary concerns about this (or any aftermarket) BBU.
Havent been in the Country as of late so Brian didn't get my order yet. So I haven't had time to test drive these little fuckers yet...

[Danke]

All the frames are in pieces to re-work the front chassis so the Guns Modify trigger will fit.

Maybe this weekend.

[e-luder]

Originally Posted by Danke

All the frames are in pieces to re-work the front chassis so the Guns Modify trigger will fit.

Maybe this weekend.

It doesn't fit!?
really!?

wait... is this the Timberwolf frame set up still?

[Danke]

I have a few triggers and a few frames. It "fits" but with so much drag he trigger return is null and void.

[.Zo]

Hey e-luder I need a new loading nozzle but I can't find the AS one anywhere, recommendations?

[e-luder]

Originally Posted by .Zo

Hey e-luder I need a new loading nozzle but I can't find the AS one anywhere, recommendations?

http://www.airsoftparts.ca/store2/in...oducts_id=1993

[turok_t]

Preliminary results for the guns modify bbu aren't looking too well for me. When I manually rack the hammer, the v3 hammer cocks, but when firing, the bbu doesn't seem to push it back enough to cock the hammer for the sear to catch it. But take these results with a grain of salt because there can be many factors involved (ie. gas seal, slide) specific to my setup. I need to do more testing with various parts to arrive at a conclusion.

[Sequential]

Originally Posted by turok_t

The build quality of these are awesome, and shipping was dirt cheap. Can't wait to install these on my G17's:

Where did you find these and did they have em for the Hi Capa?

[kar120c]

I have troubles installing Airsoft Surgeon nozzle and piston head in my Kjw Glock.
I am not sure from what side the piston head should be screwed and is the stock blue piston must be reused inside the new nozzle.

[kar120c]

the issue seems to be solved upgrading the piston head with the the Airsoft Surgeon one

[kar120c]

Originally Posted by kar120c

the issue seems to be solved upgrading the piston head with the the Airsoft Surgeon one

Sorry, this post should be deleted was for another thread

[e-luder]

Originally Posted by kar120c

I have troubles installing Airsoft Surgeon nozzle and piston head in my Kjw Glock.
I am not sure from what side the piston head should be screwed and is the stock blue piston must be reused inside the new nozzle.

The flat part needs to face the BBU.
You can't fit the screw properly if you put the rounded side against the BBU.

So...
The rounded side is the "front" side and needs the screw head to rest on it.

[kar120c]

Originally Posted by e-luder

You can fix your magazine catch problem by doing this:

Get a Coke a can. Cut a piece of the side off. Now cut the piece to match the shape of the groove on the magazine catch. Then superglue that badboy in place. Make sure it is as flat as possible.

Do a trial run by stacking as many pieces you need before you glue them altogether. That should create the packing you need to raise your magazine up higher.

The best part is... it only cost you a can of Coke.

Anyone can post a pics of this mod? I can't understand it well, because my KJW G27 suffers this issue