Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Tanio Koba / KJW M4 GBBR Basic Information and FAQ

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old December 4th, 2011, 19:36   #646
audi_bhoy
 
Join Date: Mar 2009
Location: Trois-Rivières
Make sure your spacers and o-ring are seating properly on the shaft (all pushed toward the back stopper), otherwise it will cause inconsistency in FPS from shot to shot.
audi_bhoy is offline   Reply With Quote
Old December 5th, 2011, 04:19   #647
StanB.
 
Join Date: Nov 2011
Thanks, gonna check if they are sitting perfectly.
StanB. is offline   Reply With Quote
Old December 5th, 2011, 04:56   #648
LocoYokoPoco
a.k.a. ian209
 
LocoYokoPoco's Avatar
 
Join Date: May 2009
Location: Calgary, AB, Canada
Yea, the cradle velocity reducer does indeed reduce the overall velocity even without the spacers. If you look at it, the cradle valve only has 2 cutouts, while the stock one has 4.
__________________
World record in propane sniffing.

Armory
-KWA Tavor TAR21 GBBR
-TM PX4 w/Detonator Aluminum Slide
LocoYokoPoco is offline   Reply With Quote
Old December 5th, 2011, 06:56   #649
White_knight
 
White_knight's Avatar
 
Join Date: Jul 2006
got some new parts for my m4, if you want a rock solid gun with absolutely NO rattle in the receiver, get the RAtech magic pin. i highly recommend it

http://www.airsoftparts.ca/store2/in...oducts_id=2114
__________________
Burnaby / Vancouver area Age verifier

White_knight is offline   Reply With Quote
Old December 5th, 2011, 07:34   #650
StanB.
 
Join Date: Nov 2011
Quote:
Originally Posted by White_knight View Post
got some new parts for my m4, if you want a rock solid gun with absolutely NO rattle in the receiver, get the RAtech magic pin. i highly recommend it

http://www.airsoftparts.ca/store2/in...oducts_id=2114

Just the front pin? Just the rear pin? Or both?
StanB. is offline   Reply With Quote
Old December 5th, 2011, 09:06   #651
LocoYokoPoco
a.k.a. ian209
 
LocoYokoPoco's Avatar
 
Join Date: May 2009
Location: Calgary, AB, Canada
Quote:
Originally Posted by White_knight View Post
got some new parts for my m4, if you want a rock solid gun with absolutely NO rattle in the receiver, get the RAtech magic pin. i highly recommend it

http://www.airsoftparts.ca/store2/in...oducts_id=2114
I don't know about you, but I had to file some material off the lower to get the pin to fit correctly. But otherwise, it makes the gun absolutely rock solid.


Quote:
Originally Posted by StanB. View Post
Just the front pin? Just the rear pin? Or both?
It's the front pin.
__________________
World record in propane sniffing.

Armory
-KWA Tavor TAR21 GBBR
-TM PX4 w/Detonator Aluminum Slide
LocoYokoPoco is offline   Reply With Quote
Old December 5th, 2011, 10:22   #652
White_knight
 
White_knight's Avatar
 
Join Date: Jul 2006
yes i had to do the same, only took a few strong passes with a file. only 1mm was needed. but after that man its solid. no rattle at all
__________________
Burnaby / Vancouver area Age verifier

White_knight is offline   Reply With Quote
Old December 5th, 2011, 10:29   #653
StanB.
 
Join Date: Nov 2011
Question: When I go in full-auto or fast semi, after 3 fast shots, a big load of gas comes out with the next shot, does anyone else got this phenomenom? Temperature is around 22 degrees celsius.
StanB. is offline   Reply With Quote
Old December 5th, 2011, 19:47   #654
audi_bhoy
 
Join Date: Mar 2009
Location: Trois-Rivières
Are you keeping your M4 well lubricated, speaking of the internals, and do you had silicone oil to your propane as it should? Also, this might be your mag's valve that isn't oiled properly...
audi_bhoy is offline   Reply With Quote
Old December 6th, 2011, 04:56   #655
StanB.
 
Join Date: Nov 2011
Mags and Internals are all well lubricated (a few with silicone spray and the most orings with silicone lube). And pretty much nobody here in Austria uses Propane, we all use Green or Top Gas which already has silicone in it.
StanB. is offline   Reply With Quote
Old December 7th, 2011, 22:00   #656
KoreyC
 
Join Date: Aug 2011
Anyone know where I can find some sort of guide to installing the V2 bolt carrier and buffer? I've tried searching for a while, but no dice..
KoreyC is offline   Reply With Quote
Old December 7th, 2011, 22:02   #657
Saberwing
 
Saberwing's Avatar
 
Join Date: Mar 2007
Location: London, ON
Quote:
Originally Posted by KoreyC View Post
Anyone know where I can find some sort of guide to installing the V2 bolt carrier and buffer? I've tried searching for a while, but no dice..
It should be a drop in replacement
__________________
KJW Mk18 MOD1 BLOCK 2 - Well VSR-10 - Les Baer Ultimate Recon
Saberwing is offline   Reply With Quote
Old December 7th, 2011, 22:35   #658
KoreyC
 
Join Date: Aug 2011
Quote:
Originally Posted by Saberwing View Post
It should be a drop in replacement
Yeah, I just looked a moment ago and 'facepalm'ed. Tried to get back here before anyone noticed, not quick enough I guess.
KoreyC is offline   Reply With Quote
Old December 7th, 2011, 22:47   #659
LocoYokoPoco
a.k.a. ian209
 
LocoYokoPoco's Avatar
 
Join Date: May 2009
Location: Calgary, AB, Canada
Anyone know of someone in Canada that can get the TDC (Grub screw hopup mod) done? Cradle unfortunately only offers that service in the states
__________________
World record in propane sniffing.

Armory
-KWA Tavor TAR21 GBBR
-TM PX4 w/Detonator Aluminum Slide
LocoYokoPoco is offline   Reply With Quote
Old December 7th, 2011, 23:36   #660
Coresair
 
Coresair's Avatar
 
Join Date: Jan 2010
Location: Notre-Dame-de-Guns, MTL.
Sorry to hi-jack the thread (since I'm more of a WE guy) but I'm actually pretty glad/excited for you guys!

It's in french, but pics will do the talking:

http://www.airsoftnews.fr/2011/12/07...bb-r-kj-works/



cheers guys!
__________________
Quote:
Originally Posted by Mitchell12 View Post
I don't need an excuse, I like doing it. Why do you like sex? Because it gives you babies? Doubtful.
Coresair is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 23:45.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.