VSR-10 Hopup Problem

Tomolok · July 4th, 2010, 14:47

So I bought a used VSR10 with a stock barrel/hopup setup, for whatever reason there was no backspin on my BBs.

I managed to get a Laylax VSR-10 hopup chamber which requires an AEG barrel which I had lying around (509mm Madbull 6.03mm), everything installed with PDI barrel spacers, but the BB's are still arching whether the hopup lever is at zero or at max, what could the problem be?

Note: The gun has been chronied at 370fps with BB Bastard 0.25s so it's not a cylinder issue.
PDI Vtrigger installed
Laylax orange zero piston with PDI 200 spring and Laylax Bearing Spring Guide

Doctors please help me out!!

ScooterVauto · July 23rd, 2010, 22:00

did you loose that little tiny nubby. appearantly it goes outside the rubber but under the adjustment lever.
I understand it to be the bit that pushes down the rubber creating contact and thus back spin..

I read in a post (Forgive me but i forget the name of the Poster) that if you loose the nubby you can use the end of the ink cartridge from a old school bic pen..

CDN_Stalker · July 23rd, 2010, 22:37

Quote:

Originally Posted by Tomolok

So I bought a used VSR10 with a stock barrel/hopup setup, for whatever reason there was no backspin on my BBs.

I managed to get a Laylax VSR-10 hopup chamber which requires an AEG barrel which I had lying around (509mm Madbull 6.03mm), everything installed with PDI barrel spacers, but the BB's are still arcing DOWN whether the hopup lever is at zero or at max, what could the problem be?

Note: The gun has been chronied at 370fps with BB Bastard 0.25s so it's not a cylinder issue.
PDI Vtrigger installed
Laylax orange zero piston with PDI 200 spring and Laylax Bearing Spring Guide

Doctors please help me out!!

Am I correct with that understanding? If so, above post covers it. If arcing up, whole different ballgame.

CJay · July 24th, 2010, 02:08

On the laylax chamber u don't need that nub. Pivot bar u get with the gold chamber set has the nub built on to it and u have to grind it off if u wanna remove it so u'd know if u managed to lose it I'd hope lol

And stalker if ur arcing up it probs using really light bbs. Use at least 0.3s and see what happens. If it still arcs up then u need to modify ur hop chamber. Had to do it once but it's risky :S

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 4th, 2010, 14:47	#1
Tomolok Trader rating Join Date: Oct 2002 Location: Richmond Hill	VSR-10 Hopup Problem So I bought a used VSR10 with a stock barrel/hopup setup, for whatever reason there was no backspin on my BBs. I managed to get a Laylax VSR-10 hopup chamber which requires an AEG barrel which I had lying around (509mm Madbull 6.03mm), everything installed with PDI barrel spacers, but the BB's are still arching whether the hopup lever is at zero or at max, what could the problem be? Note: The gun has been chronied at 370fps with BB Bastard 0.25s so it's not a cylinder issue. PDI Vtrigger installed Laylax orange zero piston with PDI 200 spring and Laylax Bearing Spring Guide Doctors please help me out!! __________________

July 23rd, 2010, 22:00	#2
ScooterVauto Trader rating Join Date: Jun 2010 Location: Edmonton	did you loose that little tiny nubby. appearantly it goes outside the rubber but under the adjustment lever. I understand it to be the bit that pushes down the rubber creating contact and thus back spin.. I read in a post (Forgive me but i forget the name of the Poster) that if you loose the nubby you can use the end of the ink cartridge from a old school bic pen.. __________________ A single Light is all one needs to find their way through the darkness, But a single BB is all you need to bring it on! ========== Im not worried about the Bullet that has my Name on it, Im worried about the bullet that says "to whom it may concern" Lt. Alexander Washington -(Red Tails 1944) Ret. Last edited by ScooterVauto; July 23rd, 2010 at 22:40.. Reason: brain is slow fingers to fast

July 24th, 2010, 02:08	#4
CJay Trader rating Join Date: Oct 2008 Location: Belle River, ON	VSR-10 Hopup Problem On the laylax chamber u don't need that nub. Pivot bar u get with the gold chamber set has the nub built on to it and u have to grind it off if u wanna remove it so u'd know if u managed to lose it I'd hope lol And stalker if ur arcing up it probs using really light bbs. Use at least 0.3s and see what happens. If it still arcs up then u need to modify ur hop chamber. Had to do it once but it's risky :S __________________ "Creator of the Zombat Sniper - oh yeah baby"

VSR-10 Hopup Problem

Doctor's Corner