|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
December 30th, 2010, 16:19
|
#1 |
|
G36 Rail on M4 Handguard?
I am looking for a rail to put on the bottom of a M4 handguard, but the store I intend to buy from has single rails designed specifically for the M4 handguard. Will a G36C long rail / short fit on the standard M4 handguard? Also, will MOE rails fit?
|
|
|
|
|
December 30th, 2010, 16:29
|
#2 |
|
G36 rails won't fit on an m4, sorry. Would look a bit silly, too.
As for the handguard rails: By all means. I had one on my M16 for a while, I'm not a fan of overloading a gun with rail systems, makes it look stupid. Just enough room for a vertical grip and flashlight. |
|
|
|
|
December 30th, 2010, 16:46
|
#3 |
|
Can't do math
|
I think this is what he is after.
http://www.leapers.com/prod_detail.p...HGR16S&status= So he can add rails to his rifle, for a VFG or a AFG etc. The MOE ones and the G36 ones may work depending on the hole spacing, but the nuts provided may not work with the larger sized holes on a standard M4 handguard. Dimitri Last edited by Dimitri; December 30th, 2010 at 16:49.. |
|
|
|
|
December 30th, 2010, 20:04
|
#4 |
|
Dmitri, those would be ideal but I was wondering if any of these would work also.
 
|
|
|
|
|
|
December 30th, 2010, 20:07
|
#5 |
|
Can't do math
|
I know Airsoft Depot has the top ones, and they are not too expensive. Honestly depends on the hole patterns. The top set probably will have the most adjustment to possibly fit. But the bases will be wide and might not sit on the foregaurd grove/hole area that well.
The Leapers I posted can be found for 20-25$ so its not too expensive either. Dimitri |
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
