KWA Glock19 slide jammed

Suspect187 · July 5th, 2005, 02:33

Ok here's the problem. My glock fell out of my holster right into the sand this weekend :smack: I removed the slide and barrel to clean everything out but when I put the slide back on, it jammed. It's stuck pretty damn good, this thing ain't moving. This was my first time ever removing the slide. I know it's simple but i guess i'm not that bright. Anyways, if anyone could tell me how to get this damn thing off, it would be greatly appreciated. Better yet, if there's anyone in the Newmarket, Aurora, Richmond Hill area that could lend a hand, that would be great.

Here's some pics of my messed up glock.

http://i2.photobucket.com/albums/y4/...kfucked005.jpg
http://i2.photobucket.com/albums/y4/...kfucked004.jpg
http://i2.photobucket.com/albums/y4/...kfucked003.jpg
http://i2.photobucket.com/albums/y4/...kfucked002.jpg

thanks guys.

TheYellowDart · July 5th, 2005, 04:07

It may be that the recoil spring guide wasn't properly seated when you put the slide back on. Try to see if you can move it into position with a pen or your fingernails.

CDN_Stalker · July 5th, 2005, 09:32

Above, and if it's anything like the KSC G19, it'll have a rubber "guide" type thing on the spring guide. Put it on wrong, as in square side down, and that's exactly what happens, slide jams up good like that. Only way to fix it is to force the slide back off again. It's obviously a incorrectly placed spring guide though.

infernal · July 5th, 2005, 13:06

just a reminder... if you are going to "force" anything on your guns, do it slowly and carefully. While the KWA is only a $200 gun, you wouldnt want anything getting wrecked further.

HGI · July 5th, 2005, 15:52

dude i did the same thing to my g19 and it was stuck just like that one....

here's what i did,, just smashed the glock on the eage of the couch on the back of the slide forcing it back off....

just think of it this way.... it's already broken as it is so wtf elth can you do??

Mud Gunner · July 5th, 2005, 16:05

Me and my Glock 19 are weeping for yours in sympathy- I hate seeing injured guns

I would try a rubber mallet to gently tap thae sucker back off...

Hope it works out for you.

sdkfz234 · July 5th, 2005, 19:54

From looking at the pictures, it appears that the trigger is locked back. Remember to re-cock the hammer before reinstalling the slide (when and if you can loosen it again) in order to re-install the slide.

concept_8 · July 5th, 2005, 20:14

Atcually I think the slide'll go back on no problem without it being cocked, but it should be cocked before releasing the slide to slide it off if it's not a spring guide problem.

Suspect187 · July 5th, 2005, 20:24

thx for the advice guys. I've got a little movement in the slide now. In picture #1, notice that the slide is raised. This is preventing me from removing the slide because the slide is hitting the slide guide. I've narrowed the gap a little bit, almost there.

captainafternoon · July 8th, 2005, 19:42

Yeah that happened to a friend of mine... Twice!

I don't know how he fixed it but he just says to be carefull when putting slide back on and before you do so you always should see if you have any loose parts such as recoil spring, barrel, etc. Make sure they all fit properly.

He managed to unjam the slide but it took a nice chip out of the rails, so dont put too much force on it.

Good Luck

SPAZ_12 · July 12th, 2005, 13:51

If you have one of the plastic slides on it then you can just pry it off from one side. Did that when my G23f slide jammed, hardly left a scratch.

Suspect187 · July 13th, 2005, 04:17

Quote:

Originally Posted by SPAZ_12

If you have one of the plastic slides on it then you can just pry it off from one side. Did that when my G23f slide jammed, hardly left a scratch.

No it's a metal slide. Still workin on it.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 5th, 2005, 09:32	#3
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Above, and if it's anything like the KSC G19, it'll have a rubber "guide" type thing on the spring guide. Put it on wrong, as in square side down, and that's exactly what happens, slide jams up good like that. Only way to fix it is to force the slide back off again. It's obviously a incorrectly placed spring guide though. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

July 5th, 2005, 20:14	#8
concept_8 Trader rating Join Date: Sep 2004 Location: sudbury Ont.	Atcually I think the slide'll go back on no problem without it being cocked, but it should be cocked before releasing the slide to slide it off if it's not a spring guide problem. __________________ "Death in the tall grass"

July 5th, 2005, 04:07	#2
TheYellowDart Myoga Trader rating Join Date: Aug 2003 Location: Vancouver, BC	It may be that the recoil spring guide wasn't properly seated when you put the slide back on. Try to see if you can move it into position with a pen or your fingernails.

July 5th, 2005, 13:06	#4
infernal Trader rating Join Date: Dec 2003 Location: Calgary	just a reminder... if you are going to "force" anything on your guns, do it slowly and carefully. While the KWA is only a $200 gun, you wouldnt want anything getting wrecked further.

July 5th, 2005, 15:52	#5
HGI Trader rating Join Date: Dec 2003 Location: Nanaimo	dude i did the same thing to my g19 and it was stuck just like that one.... here's what i did,, just smashed the glock on the eage of the couch on the back of the slide forcing it back off.... just think of it this way.... it's already broken as it is so wtf elth can you do??

July 5th, 2005, 16:05	#6
Mud Gunner Trader rating Join Date: Sep 2004 Location: Edmonton	Me and my Glock 19 are weeping for yours in sympathy- I hate seeing injured guns I would try a rubber mallet to gently tap thae sucker back off... Hope it works out for you.

July 5th, 2005, 19:54	#7
sdkfz234 Trader rating Join Date: Jan 2005 Location: Cambridge, ON	From looking at the pictures, it appears that the trigger is locked back. Remember to re-cock the hammer before reinstalling the slide (when and if you can loosen it again) in order to re-install the slide.

July 8th, 2005, 19:42	#10
captainafternoon mrlexmark Trader rating Join Date: Aug 2004 Location: Oakville, Ontario	Yeah that happened to a friend of mine... Twice! I don't know how he fixed it but he just says to be carefull when putting slide back on and before you do so you always should see if you have any loose parts such as recoil spring, barrel, etc. Make sure they all fit properly. He managed to unjam the slide but it took a nice chip out of the rails, so dont put too much force on it. Good Luck

July 12th, 2005, 13:51	#11
SPAZ_12 Trader rating Join Date: Apr 2005 Location: Calgary, AB	If you have one of the plastic slides on it then you can just pry it off from one side. Did that when my G23f slide jammed, hardly left a scratch.

KWA Glock19 slide jammed

Doctor's Corner