What's the right rail system?

[seano19]

I have a G&G M4 CQB-R and I recently purchased and installed a Daniel Defense Omega rail. However it doesn't fit as nicely as I wanted it to, the top rail isn't flush with the body and there's a weird gap where there shouldn't be. I'm looking to get a rail system that will give my gun the look similar to a HK M416, where the rail system is flush with the body and the rail is continuous from beginning to end. Can anyone help me out?

Here's a picture of my gun with the Omega rail system, you can notice the gap.
00d202111538-00.jpg

[Jugglez]

The newer DD OmegaX Rail will achieve this look, it uses the DD barrel nut system rather than the standard Delta Ring attachment

http://www.airsoftparts.ca/store2/in...oducts_id=2142

[Warlock]

as per the pictures I saw on the web, it seems to not have that kind of gap on a Real steel M4 with Genuine DD omega rail. I don't know if this is only related to G&G poor fitment or this problem is on all AEG with this rail. Is your rail made by Madbul ? I was looking to put the omega rail on a KJW M4. For a HK416 look, I would suggest a Noveske 10'' FF rail.

[Warlock]

Originally Posted by Jugglez

The newer DD OmegaX Rail will achieve this look, it uses the DD barrel nut system rather than the standard Delta Ring attachment

http://www.airsoftparts.ca/store2/in...oducts_id=2142

How about the installation skill required ?

No you need special tools and lot of patience or it is a simple process ?

[seano19]

Originally Posted by Warlock

as per the pictures I saw on the web, it seems to not have that kind of gap on a Real steel M4 with Genuine DD omega rail. I don't know if this is only related to G&G poor fitment or this problem is on all AEG with this rail. Is your rail made by Madbul ? I was looking to put the omega rail on a KJW M4. For a HK416 look, I would suggest a Noveske 10'' FF rail.

As far as I can tell it's not made by Madbul, there's no markings on it besides the Daniel Defense logo and Omega

[seano19]

Would this rail system give me the look I want?

http://www.ebairsoft.com/dytac-invad...em-p-5066.html

[Drake]

Originally Posted by Warlock

How about the installation skill required ?

No you need special tools and lot of patience or it is a simple process ?

I have one of those (Madbull OmegaX 7"), very nice rail and very easy to install:

There's a special barrel nut which replaces the stock barrel nut/delta ring; the handguard fits on top and is secured with 2mm Allen screws. An Allen screwdriver is recommended but you can use an Allen key, it's just slower/slightly annoying.

I used my carry handle to align and space the rail properly with the receiver.

[Gunny_McSmith]

Daniel defense Lite or RIS2 rail should provide a gapless end result once installed! (but there might be a small gap, depending on the tolerance of your upper receiver....

[seano19]

Originally Posted by Jugglez

The newer DD OmegaX Rail will achieve this look, it uses the DD barrel nut system rather than the standard Delta Ring attachment

http://www.airsoftparts.ca/store2/in...oducts_id=2142

Thanks I think this one would suit my needs best, will I have problems installing it though? I heard G&G's are a pain when it comes to this