|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
February 10th, 2018, 16:30
|
#1 |
|
Echo 1 EBR Air seal issue
i got this thing in a trade.
i swapped out the spring, nozzle and cylinder head. I noticed that the nozzle was a little bit shorter that the stock so i switch back. it was maybe a gain of 40 fps. i put an M130 in it and cut the spring down a little bit. It's a tad longer than the one that was stock. I am literally only getting 140 fps. I changed bucking and the problem isn't there. Could cutting the spring too short have caused this? literally makes no sense for it to be doing that,,
__________________
-Dangerous- BA Level 3 Certified |
|
|
|
February 10th, 2018, 22:04
|
#2 |
|
|
Swapped the spring changed the rubber tried the stock stuff still nothing. What a piece of shit.
__________________
-Dangerous- BA Level 3 Certified |
|
|
|
|
February 11th, 2018, 00:26
|
#3 |
|
|
swapped the gearbox out for a stock Cyma from my socom. Flawless.
Guess im getting a whole new gearbox. /thread
__________________
-Dangerous- BA Level 3 Certified |
|
|
|
|
February 17th, 2018, 10:17
|
#4 |
|
|
Ended up being a piston head issue. I had a double o ring piston head that caused wayyyyy too much compression for the inner barrel to handle. Must have been blowing air out of the Hop Up.
__________________
-Dangerous- BA Level 3 Certified |
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
