Rattle after shimming and testing the gears spin

[stephanmmjohn]

Hello, first post!

So after shimming for countless hours following guides, I am getting a rattle when I spin the gears with the gear box in space with a couple screws.

There's no grease in the GB yet, and nothing else but shims and gears and bushing. I'm thinking the bushings might be too high since I left them stock (CYMA Gear box and bushing) so I'm going to take a look at that tomorrow. I might have to sand them down but if I shim right would that cause a rattle still?

Any help or advice would be appreciated. Thanks.

[RainyEyes]

Originally Posted by stephanmmjohn

There's no grease in the GB yet, and nothing else but shims and gears and bushing.

Whether you are boy or girl, you will understand that lube will help with friction issues

Put some grease on the gears it should help with the rattling.